The S&L Catalog
Zum Wireless Battery Powered Occupancy Sensor, 500sqft Coverage
Model: ZUMMESH-PIR-OCCUPANCY-BATT
Part #: 6507983
- Zum™ wireless ceiling-mount occupancy sensor
- Passive infrared motion detection
- 360°, 500sqft (46.5m2) coverage
- Half mask and perforated mask included
- Detects room occupancy and vacancy
Provides an occupancy sensor for Zum™ commercial room lighting systems. Reduces wasteful energy usage by automating room lighting based on occupancy and vacancy.
A Zum™ occupancy sensor offers a cost-saving solution for reducing energy usage in rooms equipped with a Zum commercial room lighting system. The ZUMMESH-PIR-OCCUPANCY-BATT is a passive infrared occupancy sensor designed for ceiling mount installation in areas up to 500 square feet or 46.5 square meters. It communicates wirelessly with a Zum dimmer, switch, or load controller to turn lights on and off automatically based on room occupancy and vacancy. Up to eight occupancy sensors may be employed for increased coverage.
The ZUMMESH-PIR-OCCUPANCY-BATT is battery powered and completely wireless. It operates for up to ten years or more on a single 9 Volt lithium battery (included). Zum Mesh wireless technology affords easy pair and play setup and integration as part of a complete Zum commercial room lighting system.
Featuring passive infrared (PIR) technology, the ZUMMESH-PIR-OCCUPANCY-BATT employs a highly sensitive specialized lens that divides the field-of-view into sensor zones. The sensor detects motion when a warm body passes between zones, achieving dependable motion detection with superior immunity to false triggering from vibrations, inanimate objects, or movement in an adjacent corridor. The detection sensitivity is adjustable for optimum performance. Timeout can be set anywhere from 30 seconds to 30 minutes to maintain occupied status during short periods of inactivity. A half mask and perforated mask are included to customize the coverage area.
- Zum™ wireless ceiling-mount occupancy sensor
- Passive infrared motion detection
- 360°, 500sqft (46.5m2) coverage
- Half mask and perforated mask included
- Detects room occupancy and vacancy
- Automates control of Zum dimmers, switches, and load controllers to reduce energy usage
- Turns lights on when the room is occupied and off when the room is vacant
- 10-year battery life using included 9 Volt lithium battery
- Zum Mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zum wireless lighting control solution
- Discreet, low-profile appearance
- Meets UL® 916 standard for energy management equipment
- Meets CEC Title 24 energy efficiency standards
- Meets ASHRAE® 90.1 energy efficiency standards
- ICC® International Energy Conservation Code® compliant
- Sensor Type - Occupancy/Vacancy
- Systems Controlled - Lighting
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: UL, CE, FCC
- Height: 1.19 in
- Sensing:
•Sensor Technology: Passive infrared
•Coverage Area:500sqft
•Coverage Pattern:360 degrees
•Major Motion Area:150 to 500sqft
•Minor Motion Area:0 to 150sqft - Wireless Communications:
•RF Transceiver: 2-way RF, 2.4GHz ISM Channels 11-26 (2400 to 2483.5MHz), default channel 15; IEEE 802.15.4 compliant
•Zum™ Mesh Range (Typical): 50ft (46 m) indoor to nearest peer-to-peer mesh network device(s); Subject to site-specific conditions and individual device capabilities[1]
•LED Indicators
•IR:(1) Red LED, indicates motion in test mode, unsuccessful messages and unsuccessful acquire, and low battery life
•IR:(1) Green LED, indicates successful messages and acquire, FW upgrades, good battery life - Controls (Behind Cover):
•Sensitivity Knob:(1) Knob, adjusts PIR sensitivity from low to high (scales linearly)
•Timeout Knob:(1) Knob, adjusts timeout from30 seconds to 30minutes
•Test/Acquire Button:(1) Pushbutton for Test mode, battery check, Acquire mode, and to waken device - Environmental:
•Humidity:0% to 95% RH (non-condensing) - Power Requirements (Battery):
•Type: Lithium-ion, Ultralife® 9V Lithium Battery, P/N U9VL-J-P 1200mAh
•Life:10 years (under normal operation conditions) - Enclosure:
•Housing: Lexan 221R plastic
•Mounting: (2) Self-drilling anchors, (2) Pan Phillips screws - Notes::
•1. Any Zum Mesh device that provides expander functionality will effectively extend the range of the Zum Mesh peer-to-peer network. Battery-powered Zum Mesh devices, including theZUMMESH-PIR-OCCUPANCY-BATT, do not provide expander functionality. Wireless networks composed predominantly of battery-powered devices may require additional AC powered Zum Mesh devices.
•2. This product is part of Crestron T24-2013 compliant solutions. Reference the T24-2013 design guide for additional devices required for fully compliant solutions.
•3. This product is part of Crestron ASHRAE 90.1-2013 compliant solutions. Reference the ASHRAE 90.1-2013 design guide for additional devices required for fully compliant solutions.
•4. This product is part of Crestron IECC-2015 compliant solutions. Reference the IECC-2015 design guide for additional devices required for fully compliant solutions. - Diameter: 4.38 inch
- Weight with battery: 4.8 oz
- Wireless: Yes
- Product Weight: 0.22 lbs
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/