The S&L Catalog
AV Bridge Wireless Control Integration Module
Model: ZUMMESH-AVBRIDGE
Part #: 6507997
- Enables Crestron® Battery-Powered Wireless AV Keypads for all applications
- Enables use of Zum™ occupancy and vacancy sensors for non-Zum applications
- Connects the keypads and sensors to a control system or computer
- Interfaces a complete Zum commercial lighting system to a local AV control system
- Choice of RS-232 or USB interface
The AV Bridge (ZUMMESH-AVBRIDGE) is a wireless control integration module designed for use with Crestron® battery-powered wireless AV keypads (ZUMMESH-KPAVBATT) and Zum™ wireless battery-powered occupancy and vacancy sensors (ZUMMESH-PIR-OCCUPANCY-BATT and ZUMMESH-PIR-VACANCY-BATT). It enables simple control of AV and other functions by connecting the keypads and sensors to a control system or computer. A simple, brand-agnostic command set allows for integration with both Crestron and third-party systems via RS-232 or USB. The AV Bridge pairs wirelessly with up to eight keypads and eight sensors in a room without requiring a separate wireless gateway.
The AV Bridge also enables integration between a complete Zum commercial lighting system and an AV control system within the same room, communicating wirelessly with each Zum device in the room via the Zum Mesh wireless network. Integrating the lighting and AV systems enables control of the lights from any touch screen, keypad, handheld remote, or mobile device app tied to the control system. It also enables automation of the lights using any occupancy sensor, daylight sensor, or other device tied to the control system. Conversely, the current state of the Zum lighting devices (active lighting scene, dimming levels, occupancy status, daylight levels) can report to the control system to integrate and automate the AV and other equipment tied to the control system.
The Zum AV Bridge is designed to be mounted to a wall or other flat surface. Care should be taken when positioning the device to avoid interference from nearby RF devices, obstructions, and metal surfaces. The unit can be powered by a regulated 12-24 Volt DC power source or USB power.
- Enables Crestron® Battery-Powered Wireless AV Keypads for all applications
- Enables use of Zum™ occupancy and vacancy sensors for non-Zum applications
- Connects the keypads and sensors to a control system or computer
- Interfaces a complete Zum commercial lighting system to a local AV control system
- Choice of RS-232 or USB interface
- Simple, brand-agnostic command set
- Zum Mesh peer-to-peer wireless technology - no gateway required
- Ultra-compact, surface mount design
- 12-24 Volt DC or USB powered
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 32 F
- Certifications: FCC
- Active Power: 1 Watt
- DC Voltage: 24 Volts
- Depth: 2.49 in
- Height: 0.69 in
- Width: 2.58 in
- Product Weight: 0.10 lbs
- Wireless Communications:
•RF Transceiver: Zum Mesh 2-way RF, 2.4 GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant, AES-128 encryption
•Range: 50ft (15m) to nearest peer-to-peer mesh network device(s), subject to site-specific conditions and individual device capabilities
•Note: A maximum of 32 Zum Mesh wireless devices is permitted per room inclusive of a maximum of 8 battery-powered keypads and 8 occupancy or vacancy sensors. - Wired Communications:
•RS-232: 2-way serial up to 115.2k baud (TD/RD only)
•USB: USB 1.1, appears as a virtual COM port on the host computer - Connectors:
•COM: (1) 3-pin 3.5 mm detachable terminal block, Bidirectional RS-232 port
•COMPUTER: (1) USB Type Micro-B connector, female, USB 1.1 device port, 3ft (0.91m) USB micro-B male to A male cable included
•PWR 12-24 VDC: (1) 2-pin 3.5mm detachable terminal block, 12-24VDC power input - Controls and Indicators:
•PWR: (1) Bi-color LED, amber indicates device is booting, green indicates device is operating
•NET: (1) Amber LED, indicates Zum Mesh wireless network activity
•TX: (1) Green LED, indicates serial data transmission
•RX: (1) Green LED, indicates serial data reception
•ERR: (1) Red LED, indicates an error condition
•SETUP: (1) Red LED and (1) recessed pushbutton for room setup and factory reset - Environmental:
•Humidity: 10% to 90% RH (non-condensing)
•Heat Dissipation: 3 BTU/hr - Construction:
•Plastic, black, (2) integral surface mounting flanges, vented sides
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/