The S&L Catalog
Zum Wireless ELV Wall-box Dimmer, 100 to 277V Line/Load Voltage, Almond Smooth
Series: ZUMMESH-DELV
Model: ZUMMESH-DELV-A-S
Part #: 6508558
- Zum™ wireless ELV wall-box dimmer
- Pair and play with Zum occupancy sensors, vacancy sensors, and daylight sensors
- Zum Mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zum wireless lighting control solution
- Single rocker switch and status LED
- Reverse phase dimming technology
A wireless wall-box dimmer for 120-277 Volt load control of dimmable electronic low-voltage halogen or LED, incandescent, tungsten-halogen, electronic CFL, and 2-wire fluorescent ballasts in a Zum™ commercial lighting system.
The Zum™ wireless ELV wall-box dimmer (ZUMMESH-DELV Series) provides control of a single 120-277 Volt lighting load consisting of dimmable electronic low-voltage (halogen or LED), incandescent, tungsten-halogen, electronic CFL, and 2-wire fluorescent ballasts. It features a single rocker switch to enable simple on/off switching and dimming adjustment, with the ability to save one preset. Standard gang-box installation allows one or more units to be installed in a 3-1/2 inch (89mm) deep electrical box (decorator-style faceplate sold separately).
Zum Mesh wireless technology affords easy “pair and play” integration as part of a complete Zum commercial lighting system. Energy-saving options are available to enable daylighting, occupancy or vacancy sensing, and centralized monitoring and management.
Energy Efficiency
Occupancy sensor, vacancy sensor, and daylight sensor connectivity drive the potential for significant energy savings. Lights will turn off automatically when the room is vacant and dim gradually according to the amount of natural daylight in the room. This reduces energy usage while maintaining a consistent light level for a comfortable workspace.
Pair and Play Setup
Designed with flexibility and ease-of-use in mind, Zum dimmers are pre-programmed with “pair and play” functionality. An installer can simply install the dimmer in a room along with Zum occupancy or vacancy sensors and/or a daylight sensor, set up the room with a few quick button taps, and then use the dimmer to control the lights in the room - no programming required. Room setup can also be accomplished using the Zum app if the room is equipped with a Zum Network Bridge. The Zum Network Bridge also enables centralize monitoring and management via a Zum Floor Hub and Zum Net Wireless Gateway.
- Zum™ wireless ELV wall-box dimmer
- Pair and play with Zum occupancy sensors, vacancy sensors, and daylight sensors
- Zum Mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zum wireless lighting control solution
- Single rocker switch and status LED
- Reverse phase dimming technology
- Supports dimmable electronic low-voltage halogen or LED, incandescent, and electronic CFL lighting loads
- Rated 500W at 120 to 277VAC
- Built-in air gap switch
- Flying lead wiring connections
- Standard 3-1/2 inch (89mm) deep electrical box installation
- Matching decorator-style faceplate available separately
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: UL, FCC
- AC Voltage (Maximum): 277 Volts
- AC Voltage (Minimum): 120 Volts
- Active Power: 500 Watt
- Depth: 1.80 in
- Height: 4.13 in
- Width: 1.75 in
- Product Weight: 0.31 lbs
- Color: Almond Smooth
- Load Control:
•Dimmable Load Types: Electronic low-voltage (ELV transformer for halogen or LED), incandescent, tungsten-halogen, electronic CFL, 2-wire fluorescent ballast - Wireless Communications:
•RF Transceiver: Zum Mesh 2-way RF, 2.4GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant, AES-128 encryption
•Range: 50ft (15m) to nearest peer-to-peer mesh network device(s), subject to site-specific conditions and individual device capabilities
•Note: A maximum of 32 Zum Mesh wireless devices is permitted per room. - Controls and Indicators:
•Switch: (1) Rocker switch (spring return to center), press up to recall the locally saved preset (turns the lighting load on at the saved preset dim level), press down to turn the lighting load off, press and hold up or down to raise or lower the dimming level, also used for creating a preset, room setup, and factory reset
•Status: (1) Green LED, indicates the lighting load is turned on, also used for creating a preset, room setup, and factory reset
•Air-Gap Switch: (1) Latching switch, opens the air-gap to de-energize the load output - Connections:
•Hot: (1) 16AWG (1.5mm²) Class 1 flying lead, black, line power input
•Neutral: (1) 16AWG (1.5mm²) Class 1 flying lead, white, neutral
•Ground: (1) 16AWG (1.5mm²) Class 1 flying lead, green, ground
•Load: (1) 16AWG (1.5mm²) Class 1 flying lead, red, dimmed load output - Construction:
•Composition: Plastic housing and front face with metal bracket
•Mounting: Mounts in a 1-gang (or larger) 3-1/2 inch (89mm) deep electrical box
•Faceplate: Requires a decorator-style faceplate - Wireless: Yes
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/