The S&L Catalog
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
35watt Mixer Amplifier, 25, 70, 100 V, with Power Supply
Series:
Model: HD-MA35UA
- Four inputs with individual front-panel volume controls
- Bass and Treble tone controls
- Designed for background music with paging and music-on-hold
- Master volume VCA controlled with remote adjustment capability
- Manual or automatic (VOX) priority ducking
Product Info
Tech Specs
Related Products
Documents
Accessories
The HD-MA35UA is a four input audio mixer amplifier for systems demanding the broadest range of features and the highest energy efficiency. Two output power amplifier zones, 35 watts (Zone 1) and 4 watts (Zone 2), are driven from high-efficiency Class D amplifier stages. The mixer and amplifier sections all normally shut down (standby "sleep" mode) when audio is absent and automatically turn on when needed. The Zone 1 amplifier output level may be VCA controlled using various optional RDL remote controls, or by industry standard 0 to 10 Vdc or 0 to 10k ohm controls. This output provides a constant voltage output (25 V, 70 V or 100 V). The Zone 2 amplifier output drives an 8 ohm speaker and/or 600 ohm telephone equipment. The HD-MA35UA is engineered, tested and manufactured in the U.S.A. to strict energy conservation standards. The unit consumes less than 1 watt of mains power in standby mode, and meets power amplifier efficiency specifications with analog-filtered Class-D digital output stages for both power amplifier output zones and for the 600 ohm output. The HD-MA35UA features two mixers. The Zone 1 mixer is located on the front-panel providing user level and tone controls for the 35 watt amplifier output. The tone controls adjust the equalization at the Zone 1 amplifier output and can be switch selected on the rear panel to also adjust the equalization at the line-level output. The Zone 2 mixer on the rear panel provides level trimmers normally set by the installer to provide music-on-hold and/or for background music in a small zone equipped with an 8 ohm speaker. The Zone 2 section includes a 4 watt amplifier, a 600 ohm transformer-balanced MOH output, and an active balanced line-level output that may be used to feed another audio power amplifier. The HD-MA35UA has four inputs that are common to both mixers. Inputs 1 and 2 accept balanced mic or line level sources. Inputs 3 and 4 accept unbalanced mono or stereo line-level sources.
- Four inputs with individual front-panel volume controls
- Bass and Treble tone controls
- Designed for background music with paging and music-on-hold
- Master volume VCA controlled with remote adjustment capability
- Manual or automatic (VOX) priority ducking
- Balanced inputs and amplified outputs on detachable terminal blocks
- Unbalanced inputs and outputs on RCA jacks
- Includes power supply
- Automatic sleep mode meets strictest energy saving standards
- Amplifier Signal Type - Audio
- Amplifier Type - Power Amplifier
- Spec Sheet available - Yes
- Amplifier Zones (2):: Zone 1 (Main): 35 W RMS, front-panel mixer (user controls); Zone 2: 4 W RMS (8 Ohms), rear-panel mixer (trimmers)
- Audio Inputs (5):: 2, balanced, mic or line switch selectable on terminal blocks; 2, unbalanced stereo summing inputs on RCA jacks; 1, unbalanced amp in on RCA jack
- Gain Adjustments (2):: Inputs 1 and 2: Rear-panel single-turn trimmer
- Maximum Input Level:: Mic Inputs: -9 dBu; Balanced line inputs: + 20 dBu; Unbalanced Inputs: + 5 dBV (+11 dBV, one input); (for 1% THD+N at output)
- Phantom Voltage:: 24 Vdc (IEC 1938: 1996-12), switch-selectable for each mic input
- Ducking/Muting Actuation:: Automatic (Input 1 VOX: rear-panel adjustable signal threshold with LED indicator) or Manual (contact closure to ground)
- Ducking/Muting Release Delay:: Rear-panel single-turn trimmer, adjustable 2 to 6 seconds
- Ducking/Muting:: Switch-selectable for inputs 2, 3 and/or 4, 25 dB ducking attenuation, nominal
- Effects Loop:: Unbalanced RCA jacks (preamp output from main mixer, input to power amplifier)
- External RDL Module Power Output:: 24 Vdc, 100 mA maximum, ground-referenced
- Input level (to cross compressor threshold equaling 23 W amplified output):: Mic Inputs: -50 dBu (2.5 mV), (front panel and rear trimmer at max.) Balanced line inputs: -21 dBu (70 mV), (front pane Unbalanced Inputs: -15 dBV (180 mV), (front panel and rear trimmer at max., both inputs driven)
- Noise (line or amplified outputs):: Mic or Balanced line inputs: -70 dB (below compressor threshold at max gain); Unbalanced Inputs: <-75 dB (max gain)
- THD+N:: < 0.5% (1 kHz at compressor threshold, main amp output); < 0.1% (line output, main)
- CMRR:: Mic inputs: > 50 dB (50 Hz to 120 Hz); Balanced line inputs: > 80 dB (50 Hz to 120 Hz, transformer-coupled input)
- Compressor:: Threshold 2 dB below rated output, automatically adjusting attack and release times
- Frequency Response (mixer):: Mic to line output: ±1.5 dB (40 Hz to 25 kHz); Balanced line input to line output: ±1 dB (20 Hz to 20 kHz); Unbalanced line input to line output: ±0.5 dB (20 Hz to 20 kHz)
- Frequency Response (amplifiers):: Constant voltage: ±3 dB (50 Hz to 18 kHz); 4/8 Ohm: ±1 dB (50 Hz to 20 kHz)
- Tone Controls:: ±10 dB @ 10 kHz, ±9 dB @ 100 Hz (front-panel) with center detent
- Audio Outputs (2):: -10 dBV nominal (316 mV), dual mono unbalanced RCA (main mixer; FLAT or EQUALIZED, switch-selectable on rear panel); 0 dBu nominal balanced, terminal block (zone 2 mixer)
- MOH Output:: 0 dBu nominal (775 mV), 600 Ohm transformer-isolated, 16 dB headroom
- Power Amplifier Outputs (2):: Zone 1 (main): 35 W RMS (25, 70 or 100 V); Zone 2: 4 W (8 Ohms, on detachable terminal block)
- Indicators (9):: Front-panel: Signal present (4; 1 per input, green), Compressor activity (red), Power (bright=on, dim=standby, blue); Rear-panel: dual-LED VU meter (for inputs 1 and 2, green/red), Ducking/muting threshold (yellow)
- VCA:: Zone 1 (main) master level (with switch-selectable input 1 bypass), 0 to 10 Vdc control, RJ45 (compatible with RDL VCA wall controls)
- Front-panel controls (7):: Zone 1 (main) mixer level controls (4, inputs 1 through 4), EQ (2, bass and treble), Power (momentary pushbutton, toggle on/standby)
- Rear-panel controls (22):: Gain trimmers (2, input 1 and 2), Mic/Line switch (2, input 1 and 2), Zone 1 line output pre/post-EQ switch, Effects loop bypass switch, Sleep (standby) mode delay (4 binary switches), Input 1 ducking/muting detector sensitivity trimmer, Phantom voltage switches (2, input 1 and 2), Ducking control switches (3, to duck inputs 2, 3, and/or 4), VCA paging bypass (includes or excludes input 1 from master VCA control) Zone 2 mixer level controls (4, inputs 1 through 4 Efficiency Standard:
- Sleep Mode Power Consumption:: < 1 W (amplifier and included power supply)
- Sleep Mode Delay:: 10 minutes to 2 hours (switch-selectable in 10 minute increments)
- Sleep Mode Disable:: Selectable
- Active Mode Delay:: 2 seconds (nominal) after input audio detected
- Audio Detector Threshold:: -80 dBu mic (at max input gain), -55 dBu balanced line (at max input gain), -42 dBV unbalanced
- Power Supply (included):: 100 to 240 Vac, 50-60 Hz, 50 W; 24 Vdc output to amplifier chassis
- Depth: 10 in
- Height: 3.50 in
- Width: 8.50 in
- Product Weight: 7.30 lbs
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Shipping Weight: 7.30 lbs
FP-NML2
- Network to Mic/Line Interface
FP-NML2P
- Network to Mic/Line Interface with PoE
FP-NML2VP
- Network to Mic/Line Interface with VCA, PoE
HD-MA35
- 35watt Mixer Amplifier with Power Supply - Low Impedance Output 4 Ohm or 8 Ohm
HD-MA35A
- 35watt Mixer Amplifier with Power Supply, Constant Voltage Output 25 V, 70 V or 100 V
HD-MA35U
- 35watt Mixer Amplifier, 4 Ohm / 8 Ohm, with Power Supply
HD-PA35
- 35watt Power Amplifier with Power Supply, Low Impedance Output 4 Ohm or 8 Ohm
HD-PA35A
- HD-PA35A 35 Watt Power Amplifier with Power Supply - Constant Voltage Output 25 V, 70 V or 100 V
HD-PA35U
- 35 Watt Power Amplifier, 4 Ohm / 8 Ohm, with Power Supply
HD-PA35UA
- 35watt Power Amplifier; 25, 70, 100 V, with Power Supply
HD-RA35U
- 35watt Remote Mixer Amplifier, 4 Ohm / 8 Ohm, with Power Supply
HD-RA35UA
- 35watt Remote Mixer Amplifier; 25, 70, 100 V, with Power Supply
HD-MA35UA 35 Watt Mixer Amplifier - 25, 70, 100 V, with Power Supply
3120 kb
- Data Sheet
HD-MA35UA 35 Watt Mixer Amplifier - 25, 70, 100 V, with Power Supply
570 kb
- Instructions
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact S&L Integrated
close
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/
Contact in regards to this product:
Radio Design Labs
Model: HD-MA35UA
B2B INQUIRIES ONLY
Request more information from a dealer near you
close
Request more information from a dealer near you