The S&L Catalog
RU-AFC2 Stereo Audio Format Converter
Series:
Model: RU-AFC2
- Unparalleled Audio Performance
- Unbalanced to Balanced Audio Conversion
- Additional Summed MONO Out
- Switch-Selectable Ground Lift for XLR Output Jacks
- Balanced to Unbalanced Audio Conversion
The RU-AFC2 is a stereo bi-directional audio format converter. The bi-directional format allows the RU-AFC2 to fully convert the stereo input and stereo output of a consumer audio product to professional balanced standards. It can equally convert the stereo input and stereo output of a professional audio product to consumer unbalanced standards. The audio fidelity, low noise, low distortion and excellent crosstalk performance of the RU-AFC2 are ideally suited to the most critical applications. The RU-AFC2 has been carefully engineered in meticulous detail to provide the ultimate audio interface package available.
Unbalanced audio connections are available on front-panel RCA jacks. Balanced audio connections are available on front-panel XLR jacks and on rear-panel detachable terminal blocks. The shield connections of the XLR output jacks are connected to the case through a rear-panel ground-lift switch. The unbalanced to balanced section includes an additional MONO summed output on a rear-panel detachable terminal block which may be wired balanced or unbalanced. The mono output may be used to drive patch-bay jacks, powered monitors or subwoofer amplifiers.
Each of the left and right outputs is equipped with a dual-LED VU-meter. The intensity of the green LED is proportional to the audio level. The red LED flashes at the calibrated output level, -10 dBV unbalanced or +4 dBu balanced. An individual multi turn level trimmer is provided on the front panel for each output channel.
The RU-AFC2 operates from ground-referenced 24 Vdc. Use the RU-AFC2 individually, or combine it with other RDL products as part of a complete audio/video system.
- Unparalleled Audio Performance
- Unbalanced to Balanced Audio Conversion
- Additional Summed MONO Out
- Switch-Selectable Ground Lift for XLR Output Jacks
- Balanced to Unbalanced Audio Conversion
- Unbalanced RCA Connections on Front Panel
- Balanced XLR Connections on Front Panel
- Balanced Connections on Rear Panel Detachable Terminal Blocks
- Front-Panel Multi-Turn LEVEL Trimmers
- Dual-LED VU Meter for Each Channel
- Gold-Plated Connectors
- Exceptional Headroom and Frequency Response
- 1/3 Rack, High Density Rack Mounting
- amplifiers
- stereo mixers
- Amplifiers
- Spec Sheet available - Yes
- Unbal to Bal Section:: (Referred to -10 dBV input feeding +4 dBu)
- Inputs (2):: Unbalanced line-level, +25 dBV max.
- Input Connectors (2):: RCA Phono jack (left and right)
- Outputs (3):: +4 dBu balanced (left, right, mono sum), +25 dBu max.
- Output Connectors (4):: XLR (2) and/or detachable terminal block (left and right); detachable terminal block (mono sum)
- Gain Adjustment:: -25 dB to +9 dB (rel. +4 dBu)
- Frequency Response:: 10 Hz to 150 kHz (+/- 0.25 dB)
- THD+N:: < 0.005%
- Noise::
- < -90 dB (below +4 dBu):
- Crosstalk:: < -80 dB (20 Hz to 20 kHz)
- Headroom:: > 20 dB
- <b>Bal to Unbal Section:</b>: (Referred to +4 dBu input feeding -10 dBV)
- Inputs (2):: Balanced line-level, +25 dBu max.
- Input connectors (3):: XLR (2) or detachable terminal block (left and right)
- Outputs (2):: -10 dBV unbalanced (left and right), +17 dBV max.
- Output Connectors (2):: RCA Phono jack (left and right)
- LEVEL Adjustment:: -28 dB to +5 dB (rel. -10 dBV)
- CMRR:: > 80 dB (50 to 120 Hz)
- Frequency Response:: 10 Hz to 150 kHz (+/- 0.25 dB)
- THD+N:: < 0.001% Noise: < -100 dB (below -10 dBV)
- Crosstalk:: < -90 dB (10 Hz to 20 kHz)
- Headroom:: > 20 dB
- Power Requirement:: GROUND-REFERENCED, 24 Vdc @ 60 mA (idle), 100 mA (max)
- Ambient Operating Environment:: 0° C to 55° C
- Dimensions:: Height: 1.7 in (4.3 cm), Width: 5.8 in (15 cm), Depth: 4.375 in (11.11 cm)
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Depth: 0.44 in
- Height: 1.70 in
- Width: 5.80 in
Suggested Products
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/