The S&L Catalog
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Two Channel, 200watt Professional Amplifier
Series: SPA
Model: SPA2-200
- Up to 200watts per channel into 4 and 8ohms — the outputs of the SPA2-200 model are designed to provide up to 200watts per channel into Low-Z loads
- ENERGY STAR® qualified amplifier — The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost
- Bridgeable outputs for higher power — Bridging the outputs of the SPA2-200 will deliver up to 350watts into 70V or 100V when bridged
- Auto-Ramp provides quiet startup and power-down — The ENERGY STAR auto-ramp circuitry ensures quiet and fast power up from standby and seamless power-down following 25minutes of inactivity, dramatically reducing power consumption
- Rack-mountable 1U, half rack width enclosure — The SPA amplifers can be mounted in 1RU, 1/2 rack space, and their clever joining brackets enable easy under-table and wall-mounting
Product Info
Tech Specs
Related Products
Documents
For higher power the SPA2-200 two channel amplifier delivers up to 200watts rms per channel into 4 or 8ohms; the two channels can also be bridged providing up to 400 watts rms into 4 or 8ohms. When the channels are bridged they can be switched into 70V or 100V direct drive mode providing up to 350 watts rms into a mono 70V or 100V output. Like the other SPA models, an 80Hz highpass filter is engaged when in 70V or 100V mode.
- Up to 200watts per channel into 4 and 8ohms — the outputs of the SPA2-200 model are designed to provide up to 200watts per channel into Low-Z loads
- ENERGY STAR® qualified amplifier — The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost
- Bridgeable outputs for higher power — Bridging the outputs of the SPA2-200 will deliver up to 350watts into 70V or 100V when bridged
- Auto-Ramp provides quiet startup and power-down — The ENERGY STAR auto-ramp circuitry ensures quiet and fast power up from standby and seamless power-down following 25minutes of inactivity, dramatically reducing power consumption
- Rack-mountable 1U, half rack width enclosure — The SPA amplifers can be mounted in 1RU, 1/2 rack space, and their clever joining brackets enable easy under-table and wall-mounting
- Amplifier Type - Power Amplifier
- Energy Star rated - Yes
- Rackmountable - Yes
- ROHS Compliant - Yes
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Certifications: UL, CE, WEEE, FCC
- Impedance: 10000 ohm
- Rack Units (Height): 1
- Signal to Noise Ratio: 100 dB
- Depth: 9.50 in
- Height: 1.70 in
- Width: 8.70 in
- Product Weight: 4 lbs
- Shipping Weight: 6.50 lbs
- Number of Channels: 2
amplifier
658473 kb
- Data Sheet
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact S&L Integrated
close
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/
Contact in regards to this product:
Q-SYS
Model: SPA2-200
B2B INQUIRIES ONLY
Request more information from a dealer near you
close
Request more information from a dealer near you