The S&L Catalog
Standalone Zum Network Bridge Lighting Control System
Model: ZUMMESH-NETBRIDGE
Part #: 6507919
- Converts a standalone, single-room Zum™ lighting control system into a centrally managed networked system
- Zum Net wireless mesh network technology affords robust, building-wide communications without running wires
- Provides Bluetooth® connectivity for easy room configuration using the Zum mobile app
- Attaches to a Zum J-Box Load Controller or Zum J-box accessory power supply
- UL® 2043 listed for installation in an environmental air handling space
The Zum™ Network Bridge (ZUMMESH-NETBRIDGE) adds enhanced integration and setup capabilities to a Zum lighting control system. It simply snaps onto a Zum J-Box Load Controller or Zum J-Box Accessory Power Supply (ZUMMESH-JBOX or ZUMMESH-JBOX-PSU) to enable Zum Net wireless communication with a Zum Floor Hub via a Zum Net Wireless Gateway (ZUM-FLOOR-HUB and ZUMNET-GATEWAY). Integration with the Zum Floor Hub enables every room in the building to be centrally monitored, managed, and controlled as part of a complete Zum enterprise lighting solution. The Zum Network Bridge also adds Bluetooth® connectivity within each room to allow simplified setup using a mobile device running the Zum app. Just one network bridge is required per room.
Zum Across the Enterprise
Zum delivers cutting-edge wireless lighting control and heightened energy efficiency for the intelligent enterprise. With each room wirelessly networked to a Zum Floor Hub, Zum synergizes lighting control across the enterprise by providing centralized monitoring, management, and reporting capabilities. Zum Net wireless communication is enabled by simply adding a Zum Network Bridge to each room and pairing it with a Zum Net Wireless Gateway, which connects to the Zum Floor Hub via Ethernet. The Zum Network Bridge simply snaps onto a Zum J-Box Load Controller or Zum J-Box Accessory Power Supply in each room.
Smart Lighting Control
The Zum Network Bridge takes single-room Zum lighting control to the next level. The Network Bridge comes with a corresponding setup app that enables installers to configure and customize the room’s lighting controls. With the app, installers can set scenes, create scheduled events, and set up occupancy, vacancy, and daylight sensors. No programming is required when the controls are literally in hand.
Zum Net Wireless Technology
Ultra-reliable Zum Net wireless technology provides steadfast 2-way RF communications throughout a commercial structure without the need for physical control wiring. Employing a Wi-Fi® friendly 2.4 GHz mesh network topology, every Zum Net device acts as a “routing node,” relaying wireless commands between the Zum Net gateway and all the other Zum Net devices to ensure that every command reaches its intended destination without disruption.
- Converts a standalone, single-room Zum™ lighting control system into a centrally managed networked system
- Zum Net wireless mesh network technology affords robust, building-wide communications without running wires
- Provides Bluetooth® connectivity for easy room configuration using the Zum mobile app
- Attaches to a Zum J-Box Load Controller or Zum J-box accessory power supply
- UL® 2043 listed for installation in an environmental air handling space
- Meets UL 916 standard for energy management equipment
- Meets CEC Title 24 energy efficiency standards
- Meets ASHRAE® 90.1 energy efficiency standards
- ICC® International Energy Conservation Code® compliant
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: UL, FCC
- Depth: 1.01 in
- Height: 1.66 in
- Width: 1.94 in
- Product Weight: 0.19 lbs
- Wireless Communications:
•Bluetooth: Bluetooth low energy, Version 4.0, pairs with a mobile device running the Zum app
•Zum Net: (Refer to the host J-Box device)
•Note: Only one Network Bridge is permitted per room. - Controls and Indicators:
•SET: (1) Pushbutton and (1) red LED, used to connect to a Zum net wireless gateway - Power:
•Draws 60mA average, 250mA peak at 3.3VDC, provided by a Zum J-Box Load Controller or Zum J-box accessory power supply - Environmental:
•Humidity: 10% to 90% RH (non-condensing) - Construction:
•Housing: Plastic, white, UL94 5VA flame rated
•Mounting: Attaches to a Zum J-box load controller or Zum J-box accessory power supply, meets the requirements of UL 2043 for installation in an environmental air-handling (plenum) space
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/