The S&L Catalog
Zum Junction Box-mounted Power Supply for Zum Network Bridge
Model: ZUMMESH-JBOX-PSU
Part #: 6508208
- Provides a means for adding a Zum™ network bridge or contact closure output to a Zum lighting system
- Zum Mesh peer-to-peer RF communications
- Pair and play wireless integration with Zum dimmers, switches, occupancy sensors, vacancy sensors, and daylight sensors
- 100-277 Volts AC line powered
- Flying lead wiring connections
A Zum™ junction box-mounted power supply for the Zum network bridge or Zum contact closure output.
The ZUMMESH-JBOX-PSU is an accessory power supply that mounts to a four-inch square junction box and provides a host for a Zum™ Network Bridge (ZUMMESH-NETBRIDGE) or Zum Contact Closure Output (ZUMMESH-CCO). It communicates wirelessly with other Zum Mesh devices in a Zum commercial room lighting system to enable centralized monitoring and management using the network bridge, or to enable integration with an HVAC system using the contact closure output.
The ZUMMESH-JBOX-PSU is similar to a ZUMMESH-JBOX load controller, but without any dimming or switch circuitry onboard.
- Provides a means for adding a Zum™ network bridge or contact closure output to a Zum lighting system
- Zum Mesh peer-to-peer RF communications
- Pair and play wireless integration with Zum dimmers, switches, occupancy sensors, vacancy sensors, and daylight sensors
- 100-277 Volts AC line powered
- Flying lead wiring connections
- Knockout mount to a standard 4-inch square junction box
- UL® 2043 listed for installation in an environmental air handling space
- Meets UL 916 standard for energy management equipment
- Meets CEC Title 24 energy efficiency standards
- Meets ASHRAE® 90.1 energy efficiency standards
- ICC® International energy conservation Code® compliant
- UL Rated - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: UL, FCC
- AC Voltage (Maximum): 277 Volts
- AC Voltage (Minimum): 100 Volts
- Depth: 1.32 in
- Height: 3.25 in
- Width: 4.17 in
- Wireless Communications :
•RF Transceiver: 2-way RF, 2.4 GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant
•Zum Mesh Range (Typical): 50 ft (15 m) indoor to nearest peer-to-peer mesh network device(s) Subject to site-specific conditions and individual device capabilities
•Zum Net Range (Typical): 150 ft (46 m) indoor to a Zum wireless gateway or nearest mesh network device(s), requires the Zum Network Bridge (model ZUMMESH-NETBRIDGE); Subject to site-specific conditions and individual device capabilities
•Note: A maximum of 32 Zum Mesh wireless devices is permitted per room. Only one Network Bridge is permitted per room. - Controls and Indicators:
•SETUP: (1) Pushbutton and (1) red LED, used for room setup and factory reset
•TEST: (1) Pushbutton and (1) green LED, used for room setup and factory reset - Connections:
•Hot: (1) 14 AWG Class 1 flying lead, black, line power input
•Neutral: (1) 14 AWG Class 1 flying lead, white, neutral
•Expansion Port: Accessory port for Zum Network Bridge or Zum Contact Closure Output (model ZUMMESH-NETBRIDGE or ZUMMESH-CCO) - Construction:
•Housing: Plastic, white, UL 94 5VA flame rated
•Mounting: Mounts to the side of a 4-inch square junction box via a 1/2inch conduit knockout, meets the requirements of UL 2043 for installation in an environmental air-handling (plenum) space - Active Power: 1 Watt
- Product Weight: 0.44 lbs
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/