The S&L Catalog
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4-channel Power Amplifier, 600W/channel
Model: AMP-4600
Part #: 6508361
- High-efficiency four-channel amplifier
- Robust and reliable performance
- Professional sound quality
- 600W per channel at 4/8ohms or 70/100V
- Each channel configurable for Lo-Z or Hi-Z operation
Product Info
Tech Specs
Related Products
Documents
The Crestron® AMP-4600 amplifier is designed to complement the Crestron Avia™ family of digital signal processors, and is well-suited for all types of commercial audio applications. The AMP-4600 furnishes four channels of clean, efficient amplification in a space-saving 1 RU rack-mountable chassis. Each channel is configurable for Lo-Z or Hi-Z operation, as well as stereo and bridged modes. Network connectivity enables configuration, monitoring, and control via the Avia Audio Tool software, a Crestron control system, Crestron XiO Cloud™ service, or Crestron Fusion® software.
Solid and Efficient Performance
The AMP-4600 is engineered to deliver exceptional performance and reliability with low distortion, low noise, and high power headroom. Advanced Class D technology maximizes efficiency to reduce power consumption and heat dissipation. An internal universal power supply with power factor correction ensures consistent performance with varying line voltages.
The AMP-4600 features professional balanced inputs that support input signal levels up to +24 dBu. Rear panel input attenuation controls allow for signal level matching. Remote level control and monitoring is enabled using the Avia Audio Tool software, or using a touch screen control panel or mobile device through integration with a Crestron control system. Integration with a control system also enables centralized monitoring and control of multiple amplifiers throughout a facility as part of a Crestron Fusion or Crestron XiO Cloud managed enterprise.
- High-efficiency four-channel amplifier
- Robust and reliable performance
- Professional sound quality
- 600W per channel at 4/8ohms or 70/100V
- Each channel configurable for Lo-Z or Hi-Z operation
- Supports 100V to 240VAC line power with 4/8ohms or 70V / 100V output
- Mono, stereo and bridged modes
- Comprehensive fault and speaker protection per channel
- Extensive front panel status indicators and output meters
- High-speed Ethernet LAN connectivity
- Software configuration, control, and monitoring
- Crestron® control system integration support
- Crestron XiO Cloud™ service support
- Crestron Fusion® enterprise management support
- Rear panel +24dBu balanced inputs and level adjustments
- Detachable terminal block connectors for easy servicing
- Single-space 19inch rack mountable
- High-density stackable without extra vent spacing
- Amplifier Type - Power Amplifier
- Rackmountable - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 41 F
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 200 Hz
- Minimum Frequency Response (Bandwidth): 0.20 kHz
- Certifications: UL 60065, FCC Class A commercial use
- Communication Ports: TCP/IP, UDP/IP, CIP, DHCP, SSL, SSH, SFTP
- Mount Type: Rack mount
- Number of Channels: 4
- Number of Inputs: 4
- Number of Outputs: 4
- Number of Watts Per Channel: 600 Watt
- Power Handling: 1200 Watt
- Signal to Noise Ratio: 103 dB
- Technology: Advanced Class D
- Total Harmonic Distortion + Noise (THD+N): 0.05 %
- Wireless: No
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 300 Watt
- Current Draw: 4 Amps
- Depth: 14.59 in
- Height: 1.72 in
- Width: 17.16 in
- Product Weight: 14.10 lbs
- Color: Black
- COMMUNICATIONS:
•Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, SSH, SFTP (SSH File Transfer Protocol)
•USB Device: USB device port for computer console (setup) - Audio:
•Input Signal Types: Balanced or unbalanced analog line-level
•Output Signal Types: 4/8 Ohm, 70 or 100 Volt direct-coupled
•Operating Modes: (Configurable via Avia Audio Tool software)
•Mono: Each channel is configurable to operate independently from all other channels
•Stereo: Adjacent channels (1 and 2, 3 and 4) are configurable to operate as a stereo pair with linked control settings
•Bridged: Adjacent channels (1 and 2, 3 and 4) are configurable to operate as an 8Ohm bridged mono output
•4/8ohm Mode: Each channel is configurable for 4/8 Ohm “Lo-Z” output
•70V/100V Mode: Each channel is configurable for 70/100 Volt “Hi-Z” output
•Output Power: 600 Watts per channel at 4-8 Ohms or 70/100 Volts nominal, 1200 Watts per bridged pair of channels at 8 Ohms
•Power Throttle: 600, 500, 400, 300, 250, 200, 150, 125, 100, 75, 50 Watts per channel
•Frequency Response: 20 Hz to 20 kHz ±0.5 dB at 1 Watt, 4-8 Ohms; 200 Hz to 20 kHz ±0.5 dB at 1 Watt, 70/100 Volts
•High Pass Filter: -3 dB at 80 Hz, 12 dB per octave in 70V or 100V mode
•S/N Ratio: >103dBA, 20Hz to 20kHz
•Channel Separation: >70dB
•Input Sensitivity: 1.29 Vrms, +4 dBu (balanced) for full rated output power
•Fault Protection: Over Current: Protects each channel individually against an excessive speaker load or shorted speaker line, DC Offset: Protects each channel and speaker line against DC voltages sensed at each output, Over Temperature: Protects the amplifier power supply and each channel against overheating due to poor ventilation or excessive temperature, Under Voltage: Protects the amplifier if the internal power supply voltage is below tolerance due to excessive output levels or insufficient line voltage
•Output Relays: Disconnects the speaker line at each output under fault conditions, and during startup and shutdown
•Audio Ramp: Ramps each channel’s audio level up to its last used setting after the corresponding output relay has closed following startup or fault recovery; ramp time 130 milliseconds - Connectors:
•LINE INPUTS 1 - 4: (4) 3-pin 3.5 mm detachable terminal blocks; Balanced line-level audio inputs; Maximum Input Level: 12.3 Vrms, +24 dBu; Input Impedance: 20k Ohms balanced
•SPEAKER OUTPUTS 1 - 4: (4) 2-pin 7.62 mm reversed gender 20A detachable terminal blocks;
•Power amplifier outputs; Wire Size: Terminals accept up to 12 AWG (3.31mm2)
•LAN: (1) 8-pin RJ45 female; 10Base-T/100Base-TX Ethernet LAN port
•100-240V~ 50/60Hz 4A-2A: (1) IEC 60320 C14 main power inlet; Mates with removable power cord (included)
•G: (1) 6-32 screw; Chassis ground lug
•COMPUTER (front): (1) USB Type B female; USB computer console port (for setup only) - Controls and Indicators:
•PWR: (1) Bi-color green/amber LED, indicates operating power supplied from AC line power, amber indicates startup in progress, green indicates normal operation, alternating green/amber indicates absence of a network connection
•RESET: (1) Recessed pushbutton, restores last saved settings
•STATUS, FAULT 1 - 4: (4) Red LEDs, each indicates an under-voltage fault condition on the corresponding channel
•STATUS, CURRENT 1 - 4: (4) Blue LEDs, each indicates an over-current fault condition on the corresponding output
•STATUS, DC 1 - 4: (4) Blue LEDs, each indicates a DC offset fault condition on the corresponding channel
•STATUS, THERM 1 - 4: (4) Blue LEDs, each indicates an over-temperature fault condition on the corresponding channel
•STATUS, 70V/100V 1 - 4: (4) Blue LEDs, each indicates the corresponding channel is configured for 70 Volt / 100 Volt operation
•VU 1 - 4: (4) 5-segment LED bar graph audio level meters for each corresponding output; each contains (4) blue LEDs for -40dB, -30dB, -20dB, and -10dB, and (1) red LED for CLIP
•LINE INPUTS 1 - 4 (rear): (4) Screwdriver-adjustable rotary controls, each adjusts the input attenuation level for the corresponding channel
•LAN (rear): (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
•SETUP (rear): (1) Red LED and (1) pushbutton for Ethernet setup, flashes while updating firmware
•Power Switch (rear): (1) Rocker switch, turns main power on or off
•Circuit Breaker Reset (rear): (1) Push button switch, resets 10A circuit breaker - Power:
•Main Power: 4-2 Amps at 100-240 Volts AC, 50/60 Hz, 10 Amps maximum
•Power Consumption: 300 Watts, all channels driven at 1/8th output power; 70 Watts, all channels idle - Environmental:
•Humidity: 10% to 90% RH (non-condensing)
•Heat Dissipation: 1025 BTU/hr, all channels driven at 1/8th output power; 240 BTU/hr, all channels idle - Construction:
•Chassis: Metal, variable-speed fan-cooled, vented side to side Front Panel: Metal, black finish with polycarbonate label overlay
•Mounting: Freestanding or 1 RU 19-inch rack-mountable (front rack ears and rear support brackets included)
AMP-2210HT
- 2x210W Commercial Power Amplifier, 4/8 ohm or High-Power 70V
AMP-2210T
- 2x210W Commercial Power Amplifier, 4/8 ohm or 70/100V
AMP-3210S
- 3x210W Commercial Power Amplifier, 4/8 ohm
AMP-3210T
- 3x210W Commercial Power Amplifier, 4/8 ohm or 70/100V
AMP-8075
- 8-Channel Power Amplifier, 75W/Ch., 4/8 Ohm or 70V, North America and Japan, 100-120V
AMP-8150
- 8-Channel Power Amplifier, 150W/Ch., 4/8 Ohm or 70V, North America and Japan, 100-120V
AMP-X300
- 4-channel Amplifier, 75W/channel
AMP-X50MP
- X Series Media Presentation Amplifier
AMPI-8075
- 8-Channel Power Amplifier, 75W/Ch., 4/8 Ohm or 100V, International, 220-240V
AMPI-8150
- 8-Channel Power Amplifier, 150W/Ch., 4/8 Ohm or 100V, International, 220-240V
Power Amplifier
1376254 kb
- Data Sheet
Power Amplifier
629229 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact S&L Integrated
close
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/
Contact in regards to this product:
Crestron Electronics, Inc.
Model: AMP-4600
B2B INQUIRIES ONLY
Request more information from a dealer near you
close
Request more information from a dealer near you