The S&L Catalog
DisplayPort to HDMI over Cat6 Extender Kit with KVM Support, 4K 60Hz, 4:4:4, USB, PoC, HDCP 2.2, up to 230 ft., TAA
Model: B127A-1A1-BDBH
- Supports 4K @ 60 Hz video resolutions (4:4:4) as specified in HDMI 2.0
- Power over Cable (PoC) technology provides power to either end via Cat6 cable
- Transmitter’s local port shows you the 4K image being displayed at the other end
- DIP switch selection allows bi-directional IR or USB function for controlling the source
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
DisplayPort to HDMI Extender Kit Ideal for Digital Signage in Schools and Lecture Halls
This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.
Extends a 4K A/V Transmission up to 230 ft.
The B127A-1A1-BDBH extends 4K signals from a DisplayPort source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H HDMI repeater or B127A-110-BH transceiver (sold separately) to the application, you can extend the signal up to 400 or 460 feet, respectively.
Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color
The B127A-1A1-BDBH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.
Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.
- Supports 4K @ 60 Hz video resolutions (4:4:4) as specified in HDMI 2.0
- Power over Cable (PoC) technology provides power to either end via Cat6 cable
- Transmitter’s local port shows you the 4K image being displayed at the other end
- DIP switch selection allows bi-directional IR or USB function for controlling the source
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- 1-year limited warranty
- Applications:
- Connect a laptop for a video or PowerPoint presentation in an auditorium or lecture hall, where the source device changes frequently
- Extend video signals from one room to another using Cat6 cable, which can pass through conduit to meet building codes
- Gain flexibility in where the receiver is placed, with the freedom to move and relocate it away from an AC outlet
- Improve the line of sight for digital signage in a hotel, restaurant, theater, house of worship, trade show or other location
- Stream Netflix, Amazon Prime, Hulu and other home entertainment channels to your HDTV or projector
- Extender Type - HDMI
- Rackmountable - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Transmission Range: 230 ft
- Certifications: CE, FCC, REACH
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Current Draw: 0.60 Amps
- Color: Black
- Warranty (Length/Type): 1 Year Limited
- Technology: Cat5/5e; Cat6; HDMI; POC; USB
- Video:
•Video Input: DISPLAYPORT (FEMALE)
•Video Output: HDMI (FEMALE)
•Number of Monitors Supported: 2
•Video Ports: DISPLAYPORT (FEMALE); HDMI (FEMALE)
•Video Ports Detail: HDMI 2.0; HDCP 1.4; HDCP 2.2; DisplayPort 1.4
•Max Supported Video Resolution:3840x2160 (4K @ 60Hz)
•Max. Distance (Between any 2 Units): 230 ft.; 400 ft. with B127A-010-H signal booster
•Max Number of Ports (Entire Chain): 1
•Max 1280 x 720 (720p) Range (ft): 230
•Max 1920 x 1080 (1080p) Range (ft): 230
•Max 1920 x 1200 Range (ft): 230
•Max 2560 x 1600 Range (ft): 230
•Max 3840 x 2160 (4K@30Hz) Range (ft): 230
•Max 3840 x 2160 (4K@60Hz) Range (ft): 230
•Transmitter Video Input: DisplayPort
•Transmitter - Number of Video Outputs: 1
•Transmitter - Local Display Output: HDMI
•Receiver/Transceiver Video Output: HDMI
•Receiver - Number of Video Outputs: 1
•Signal Range (ft): 230
•Signal Range (m): 70
•Range Extension using other Tripp Lite product: 170ft or 230ft
•Recommended Cabling: Solid Wire Cat6 Cables (Tripp Lite's N202-Series)
•Other Tripp Lite product used to extend range: B127A-010-H or B127A-110-BH
•Max Supported Color Depth: 36-bit True Color
•HDR Support: No
•3D Video Supported: Yes
•Chroma Sub Sampling: 4:4:4 - Audio:
•Audio Ports: DISPLAYPORT (FEMALE)
•Audio Ports Detail: Supports pass-through of audio formats including LPCM2.0/5.1/7.1
•Audio Input: Displayport
•Audio Output: Toslink; HDMI
•Audio Specification: Pass-through audio (LPCM 2.0/5.1/7.1) - Input:
•Voltage Compatibility (VAC): 100; 110; 120; 125; 127; 200; 208; 220; 230; 240
•External Power Supply Plug(s): AS/NZS 3112 Australia; BS 1363 UK; CEE 7/16 Schuko; NEMA 1-15P North America
•Bus Powered: No - Power:
•Power Source: Transmitter or Receiver (Included)
•Power Source Type: AC Adapter
•AC Plug Type: NEMA 1-15P; BS1363; CEE 7/16 Schuko; AS/NZS 3112
•External Power Supply Output Specs (V / A): 24V/1A
•External Power Supply Cord Length (ft.): 4.5
•External Power Supply Cord Length (m.): 1.38
•External Power Supply Certifications: CE; FCC; CCC; GS; TUV; UL; cUL
•Receiver Power Source AC Adapter (Included); Power Over Cable
•Power Over Cable (PoC) Support: Yes - USER INTERFACE, ALERTS & CONTROLS:
•LED Indicators: TX: Green (Power); RJ45 Port: Green (Connection), Orange (Activity); RX: Green (Power), RJ45 Port: Green (Connection), Orange (Activity) - Physical:
•Included Mounting Accessories: Wallmount
•Material of Construction: Metal
•Number of Displays: 1
•Form Factor/Mounting Options: Box; Wall-mount
•Receiver Unit Dimensions (hwd / cm.): 2.7 x 11.5 x 6.24
•Receiver Unit Dimensions (hwd / in.): 1.063 x 4.528 x 2.457
•Receiver Unit Weight (kg): 0.4536
•Receiver Unit Weight (lbs.): 1
•Transmitter Unit Dimensions (hwd / cm.): 2.7 x 11.5 x 6.24
•Transmitter Unit Dimensions (hwd / in.): 1.063 x 4.528 x 2.457
•Transmitter Unit Weight (kg): 0.4536
•Transmitter Unit Weight (lbs.): 1
•Unit Packaging Type: Box - Environmental:
•Storage Temperature Range: 5 to 122°F (-15 to 50°C)
•Relative Humidity: 0% to 85% RH, Non-Condensing - COMMUNICATIONS:
•Signal Range (m): 70
•EDID Compatible: Yes
•IR Remote Extension Support: Yes
•Consumer Electronics Control (CEC) Supported: Yes
•Latency: Zero-Latency
•USB Extension Support: Yes - Connections:
•Side A - Connector 1: DISPLAYPORT (FEMALE)
•Side A - Connector 2: HDMI (FEMALE)
•Side A - Connector 3: RJ45 (FEMALE)
•Side A - Connector 4: (2) 3.5MM (FEMALE); MICRO-USB B (FEMALE)
•Side B - Connector 1: HDMI (FEMALE)
•Side B - Connector 2: RJ45 (FEMALE)
•Side B - Connector 3: (2) USB A (FEMALE)
•Side B - Connector 4: TOSLINK (FEMALE); (2) 3.5MM (FEMALE) - FEATURES & SPECIFICATIONS:
Displayport Specification:1.2a
•HDMI Specification: 2.0
•HDCP Specification: 1.4; 2.2
•USB Specification: USB 1.1 (up to 12 Mbps)
•Driver Required: No
•Recommended Category Cable: Cat6
•Transmission Distance: 230 ft.
•Built-In Equalizer: No - Special Features:
•DIN Mountable: No
•Integrated/Removable Cable: No
•MST Support: No
•Included Mounting Accessory: Yes
•Multi-Resolution Support: No
Suggested Products
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/