The S&L Catalog
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Dual Mic Phantom Adapter 12, 24, 48 V - XLR
Series:
Model: FP-MPA2
- Phantom Adapter for Two Mics
- Selectable Phantom Voltage
- 12V, 24V, 48V Phantom
- Selectable Current for 24V Mics
- All Standard Buildout Resistances
Product Info
Tech Specs
Related Products
Documents
Accessories
The FP-MPA2 is the ideal choice in any applications where phantom power needs to be provided to powered microphones.
Two identical circuits are provided, with connections through XLR jacks. The microphone is connected to the module through the female XLR jack. The selected phantom voltage is applied to this jack. The microphone signal output is available on a male XLR. Phantom is blocked from this output jack. The phantom voltage is individually selectable for each input. A three position switch is provided for choosing 12 Vdc, 24 Vdc or 48 Vdc. Some microphones operating on 24 Vdc phantom perform optimally with higher value buildout resistances. For these particular 24 Vdc powered microphones, a second switch is provided to select the optimum current. The appropriate voltages are generated through a low-noise dc-dc converter and regulator circuits. Each phantom output is short-circuit protected.
The FP-MPA2's low profile and compact size permit mounting in confined spaces and in various locations in equipment racks. The location of the input/output jacks permits high-density mounting against flat surfaces while maintaining accessibility to the connectors. Installations requiring multiple FP-MPA2s are ideally designed using FP-MPA2s affixed to rack sides, or by mounting them to either the front or rear rack rails using the RDL FP-RRA.
Two identical circuits are provided, with connections through XLR jacks. The microphone is connected to the module through the female XLR jack. The selected phantom voltage is applied to this jack. The microphone signal output is available on a male XLR. Phantom is blocked from this output jack. The phantom voltage is individually selectable for each input. A three position switch is provided for choosing 12 Vdc, 24 Vdc or 48 Vdc. Some microphones operating on 24 Vdc phantom perform optimally with higher value buildout resistances. For these particular 24 Vdc powered microphones, a second switch is provided to select the optimum current. The appropriate voltages are generated through a low-noise dc-dc converter and regulator circuits. Each phantom output is short-circuit protected.
The FP-MPA2's low profile and compact size permit mounting in confined spaces and in various locations in equipment racks. The location of the input/output jacks permits high-density mounting against flat surfaces while maintaining accessibility to the connectors. Installations requiring multiple FP-MPA2s are ideally designed using FP-MPA2s affixed to rack sides, or by mounting them to either the front or rear rack rails using the RDL FP-RRA.
- Phantom Adapter for Two Mics
- Selectable Phantom Voltage
- 12V, 24V, 48V Phantom
- Selectable Current for 24V Mics
- All Standard Buildout Resistances
- Ultra-Compact All Metal Construction
- Convenience of RDL® FLAT-PAKs™
- Microphone Type - Other
- Input Impedance: 3 k ohms (balanced)
- GAIN (4 ranges): MIN: 19 dB to 38 dB (switch-selectable) LOW: 26 dB to 45 dB (switch-selectable) MED: 36 dB to 55 dB (switch-selectable) HIGH: 46 dB to 65 dB (switch-selectable)
- Headroom: XLR female (input); XLR male (output); 5 position plug-in terminal block (input and output)
- Input Clipping Level: +4 dBu (at MIN gain)
- Headroom: 20 dB (above +4 dBu
- Low-Cut Filter: 80 Hz, 6 dB/Octave (switch-selectable)
- Phantom Voltages: 12 V, 24 V (switch-selectable)
- Phantom Voltage / Buildout Standard: IEC 1938 1996-12
- CMRR: > 60 dB
- Frequency Response: 20 Hz to 20 kHz (+/- 0.2 dB)
- THD + N: < 0.1% (+4 dBu, all gain settings)
- IMD: < 0.1%
- Inputs (2): Low-impedance balanced mic
- Outputs (2): Mic signal loop-through
- Voltage and Buildout Standard: IEC 1938 1996-12
- Phantom Voltages: 12 Vdc, 24 Vdc, 48 Vdc (selectable)
- Selectable Buildouts (24V only): 1.2 kO NORMAL (standard) or 2.4 kO LO (low current)
- connector type: XLR
- Power Requirement: GROUND-REFERENCED 24 Vdc @ 120 mA
- Height: 1.42 in. 3.61 cm
- Width: 3.25 in. 8.26 cm
- overall length: 6.67 in. 16.94 cm
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Depth: 6.67 in
- Height: 1.42 in
- Width: 3.25 in
- Shipping Weight: 1.10 lbs
EZ-MPA1
- Microphone Preamplifier - Stereo Output with Compressors
EZ-MPA2
- Dual Microphone Preamplifier - Stereo Output with Compressors
EZ-MPA2X
- Dual Microphone Preamplifier, Stereo Output with Compressor
ST-MPA24
- 24V Adjustable Dual Microphone Phantom Adapter
ST-MPA48
- 48V Fixed Dual Microphone Phantom Adapter
STM-1
- Microphone Preamplifier - 50 dB Gain
Datasheet for Dual Mic Phantom Adapter 12, 24, 48 V - XLR
208049 kb
- Other
Request Quote
Suggested Products
by
Sennheiser
Thank you!
Someone will be in touch with you shortly.
Contact S&L Integrated
close
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/
Contact in regards to this product:
Radio Design Labs
Model: FP-MPA2
B2B INQUIRIES ONLY
Request more information from a dealer near you
close
Request more information from a dealer near you