The S&L Catalog
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Stereo Audio Input Switcher with Headphone Amp - 4X1
Series:
Model: EZ-HSX4
- Four Input Source Selection
- Unbalanced Stereo Audio Inputs and Output
- Inputs and Line Output on Rear-Panel RCA Jacks
- Line Output Switchable Fixed (Unity Gain) or Variable
- Variable Output Follows Front-Panel Level Control
Product Info
Tech Specs
Related Products
Documents
Accessories
The EZ-HSX4 is a stereo audio source selector with an output volume control. Line-level and headphone outputs are provided. This unit is ideal as a four input headphone amplifier and as a source selector feeding an associated audio amplifier. The EZ-HSX4 is used in stores, houses of worship, studios, sound booths, home component systems and commercial sound systems.
- Four Input Source Selection
- Unbalanced Stereo Audio Inputs and Output
- Inputs and Line Output on Rear-Panel RCA Jacks
- Line Output Switchable Fixed (Unity Gain) or Variable
- Variable Output Follows Front-Panel Level Control
- Headphone Output on 1/4" (6.3 mm) and MINI Jacks
- Headphone Output Follows Front-Panel Level Control
- Full-Size Interlocking Pushbuttons on Front Panel
- Easy-to-Push Large Buttons
- Solid-State Audio Switching
- Switch Noise Cannot Affect Signal Quality
- Switcher Type - Audio
- Switcher Audio Signal Type Supported - Unbalanced
- Switcher Audio Input Signal Type - Stereo Audio
- Switcher Connector Type - RCA
- Inputs (4):: Stereo on dual RCA jacks, > 10 kΩ, -10 dBV nominal, +10 dBV max.
- Level control:: Off to +12 dB gain
- Outputs (3):: Stereo on dual RCA jacks (line level, -10 dBV nominal, +10 dBV max. fixed, +17 dBV max. variable), 1/4” (6.3 mm) TRS or Mini jack (2 headphone, 35 mW, 100 Ω load)
- Frequency Response: 10 Hz to 20 kHz (line output ±0.05 dB, headphone output ±1.25 dB, 100 Ω load)
- THD+N:: < 0.03% (line output), < 0.1% (headphone output, 10 mW, 100 Ω load)
- Crosstalk:: < -70 dB (1 kHz)
- Noise:: < -100 dB (headphone, below 10 mW output, 100 Ω load)
- Noise:: < -80 dB (variable output, below -10 dBV, unity gain), < -95 dB (fixed output, below -10 dBV)
- 24 Vdc power supply current:: 40 mA (idle), 50 mA (max.)
- Case dimensions:: 5.75” (14.6 cm)W x 5” (12.7 cm)D
- Mounting size:: 1/3 rack width
- Crosstalk: -70 dB
- Total Harmonic Distortion + Noise (THD+N): 0.03 %
- Depth: 5 in
- Width: 5.75 in
- Shipping Weight: 1.20 lbs
EZ-HSX4_INSTALLATION_MANUAL.pdf
675 kb
- Instructions
EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width
EZ-DC2
Desktop Chassis for 1/3 Rack Width EZ Products
EZ-FP1
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6
EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width
EZ-SD1
Storage Drawer-1/6 Rack Width for EZ-RA6 or EZ-CC6
EZ-SD2
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6
EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width EZ Products
EZ-UCB2
Under Counter Bracket Pair for all EZ Product Widths
Component Chassis for 6 Increments of 1/6 Rack Width
EZ-DC2
Desktop Chassis for 1/3 Rack Width EZ Products
EZ-FP1
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6
EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width
EZ-SD1
Storage Drawer-1/6 Rack Width for EZ-RA6 or EZ-CC6
EZ-SD2
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6
EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width EZ Products
EZ-UCB2
Under Counter Bracket Pair for all EZ Product Widths
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact S&L Integrated
close
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/
Contact in regards to this product:
Radio Design Labs
Model: EZ-HSX4
B2B INQUIRIES ONLY
Request more information from a dealer near you
close
Request more information from a dealer near you