The S&L Catalog
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Mixer Pre-amplifier, 7 Channels, Rackmount Kit
Model: MIX2
- Mute switch allows Channel 1 (MIC or AUX input) to mute all other channels, or Channels 1-6 to mute Channel 7 (AUX only) input
- Post-master volume control outputs: Balanced line level output at Phoenix connector, Balanced MIC level output at Phoenix connector, Unbalanced main output at dual parallel RCA jacks
- Pre-master volume control tape output at dual parallel RCA jacks
- Low cut filter switch can reduce bass response in reverberant spaces (like gyms) and act as a horn protection filter (trumpet protection) when paging horns are used
- Includes rack mounting brackets
Product Info
Tech Specs
Documents
The MIX2 mixer/pre-amplifier features six channels, each with a microphone input at a removable Phoenix connector, and an AUX input at an RCA jack. A seventh channel (AUX only) has a front panel switch to select one of two rear panel AUX input jacks.
- Mute switch allows Channel 1 (MIC or AUX input) to mute all other channels, or Channels 1-6 to mute Channel 7 (AUX only) input
- Post-master volume control outputs: Balanced line level output at Phoenix connector, Balanced MIC level output at Phoenix connector, Unbalanced main output at dual parallel RCA jacks
- Pre-master volume control tape output at dual parallel RCA jacks
- Low cut filter switch can reduce bass response in reverberant spaces (like gyms) and act as a horn protection filter (trumpet protection) when paging horns are used
- Includes rack mounting brackets
- Spec Sheet available - Yes
- Input Channels 1-6: Microphone Inputs – balanced Phoenix connectors: 1mV (to reach 0dB 775mV output), 600 ohms AUX Inputs – unbalanced RCA connectors: 140mV (to reach 0dB 775mV output), 24kohms
- Input Channel 7: AUX Inputs – Switchable on front panel – RCA jack "A" or RCA jack "B" 100mV (to reach 0dB 775mV output), 28kohms
- Outputs: Main Output – Unbalanced parallel RCA jacks 775mV, 280ohms; Line Output – Balanced 775mV, 600 ohms and MIC Output – 7mV, 50 ohms both on removable Phoenix connector; Tape Output – Unbalanced parallel RCA jacks 75mV, 280ohms
- Frequency Response: 20Hz–20kHz ±1dB
- Signal to noise ratio: MIC 60dB AUX 65dB (from 0dB output level), Total Harmonic Distorion: <=.05%
- AC Voltage (Maximum): 230 Volts
- AC Voltage (Minimum): 115 Volts
- Active Power: 5 Watt
- Depth: 9.88 in
- Height: 1.80 in
- Width: 19 in
- Product Weight: 7 lbs
- Shipping Weight: 12.35 lbs
- Color: Black
1849-MIX2_1.pdf
331047 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact S&L Integrated
close
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/
Contact in regards to this product:
Lowell Manufacturing Company
Model: MIX2
B2B INQUIRIES ONLY
Request more information from a dealer near you
close
Request more information from a dealer near you