The S&L Catalog
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
15W Paging/re-entrant Horn with Transformer, Grille, Trim Ring Ideal for School Iintercom Systems
Model: LUH-15TA
- 15W compression driver
- 25V/70V/100V transformer (screwdriver-adjustable tap selector switch in front and rear)
- Self-contained cast aluminum housing with moisture-seal cover
- Contoured aluminum trim ring
- Fine perforation press-fit aluminum grille fits snugly for a hardware-free appearance, while helping to protect the front of the horn from nesting birds and insects.
Product Info
Tech Specs
Documents
Ready-to-install re-entrant horn with weather-resistant housing is engineered for versatile labor-saving installation in brick, concrete block, plaster, drywall, or acoustic tile (indoors or outdoors, recessed or surface-mount). For paging and general voice communications (25V, 70V, 100V or 8ohm). Ideal for school intercom systems (25V).
- 15W compression driver
- 25V/70V/100V transformer (screwdriver-adjustable tap selector switch in front and rear)
- Self-contained cast aluminum housing with moisture-seal cover
- Contoured aluminum trim ring
- Fine perforation press-fit aluminum grille fits snugly for a hardware-free appearance, while helping to protect the front of the horn from nesting birds and insects.
- Network Grey powder epoxy finish.
- Provides clear intelligibility with high SPL output over the extended vocal range.
- Loudspeaker Voltage - 100V
- Loudspeaker Voltage - 25V
- Loudspeaker Voltage - 70V
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 7.40 kHz
- Maximum Frequency Response (Bandwidth): 7400 Hz
- Minimum Frequency Response (Bandwidth): 740 Hz
- Minimum Frequency Response (Bandwidth): 0.74 kHz
- Construction: Cast aluminum trim ring and housing, Perforated aluminum grille
- Maximum SPL (Sound Pressure Level): 116.80 dB
- Power Handling: 15 Watt
- Wireless: No
- Product Weight: 4.90 lbs
- Dimensions: Housing: 7.1 in diameter housing with 8 in diameter face x 3.72 in D (180 x 203 x 94 mm), Horn, trim ring and grille: 7.1 in diameter housing with 9.6 in diameter trim ring/grille x 3.3 D x 0.772 in projection (180 x 244 x 84 x 19 mm)
- Mounting Bolt Circle: 7.625 in (194mm) with 4 holes spaced to mount an E.I.A. 8 in speaker grille
- Cutout Diameter: 0.7.25 in (184 mm)
- Installed Depth: 3.3 in
- Mounting Projection: 0.772 in
- Housing diameter: 7.1 in
- Required Hole Diameter: 7.25 in
- Transformer Input Impedance: 5000, 2500, 1300, 666, 333, 133, 89, 45 ohms (nominal)
- Conical Dispersion Angle: 80° conical at 2kHz octave (-6dB)
- 100V Taps: 2, 4, 7.5, 15 Watt
- 25V Taps: 0.13, 0.25, 0.5, 1, 1.9, 4.7, 7.5, 15 Watt
- 70V Taps: 1, 2, 3.8, 7.5, 15 Watt
- Certifications: CSA, UL
1908-LUH15TA.pdf
299467 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact S&L Integrated
close
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/
Contact in regards to this product:
Lowell Manufacturing Company
Model: LUH-15TA
B2B INQUIRIES ONLY
Request more information from a dealer near you
close
Request more information from a dealer near you