The S&L Catalog
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Wall Mounted Contact Closure Program Selection Zone Controller
Series: ZC
Model: ZC4
Part #: DBXZC4V
- Provides program selection from contact closures for dbx DriveRack and ZonePRO devices
- Offers extended utility to the DriveRack and ZonePRO families
- Offers simple yet elegant solutions
- Maximum cable length varies with number of zone controllers
- Use analog DC voltage to provide logic control ranging from zone source selection, volume and muting
Product Info
Tech Specs
Documents
The ZC-4 remote device shall provide programmable program selection via contact closures for the dbx DriveRack 220i and 260 devices. The remote device shall also provide contact closure programmable source selection, page assignment or scene selection for the dbx ZonePRO devices. The remote device shall have DIP switches allowing identification with connec-tion to the processing device via CAT5 cable on RJ-45 connectors. The device shall be a dbx ZC-4 remote controller. The zone controller offer extended utility to the DriveRack and ZonePRO families. The zone controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000ft. The ZC zone controllers offer simple yet elegant solutions to the contractor.
- Provides program selection from contact closures for dbx DriveRack and ZonePRO devices
- Offers extended utility to the DriveRack and ZonePRO families
- Offers simple yet elegant solutions
- Maximum cable length varies with number of zone controllers
- Use analog DC voltage to provide logic control ranging from zone source selection, volume and muting
- Wired with CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000ft
- UL 60065, IEC 60065, EN 55013 and E60065 safety agency certifications
- Spec Sheet available - Yes
- Connectors: (1) RJ-45, (1) 6-pin Phoenix
- Series Wiring: Maximum cable length varies with number of zone controllers (600ft for 3 zone controllers 300ft for 6 zone controllers)
- Parallel Wiring using ZC-BOB: Up to 6 zone controllers (1000ft)
- Parallel Wiring Cable: CAT5 or CAT5E with 28.6 Ohms/m (Ohm/1000ft) nominal DCR and rated VW-1 or higher
Zone Controllers
832 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact S&L Integrated
close
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/
Contact in regards to this product:
dbx, Inc.
Model: ZC4
B2B INQUIRIES ONLY
Request more information from a dealer near you
close
Request more information from a dealer near you