The S&L Catalog
Zum Wired Keypad with Link Communication, Rocker Button
Model: ZUMLINK-KP-R-W
- Provides control of one or more Zum® Wired J-Box Load Controllers
- RS485 communications for increased reliability
- Preprogrammed rocker button
- Configurable with four, six, or eight engraved or pad printed button trees (ZUMLINK-BTN4, ZUMLINK-BTN6, ZUMLINK-BTN8, not included)
- Powered by 24V Zum Link bus
The Crestron ZUMLINK-KP is a Zum® Wired Keypad that provides control of one or more Zum Link J-Box Load Controllers such as the ZUMLINK-JBOX-16A-LV, ZUMLINK-JBOX-20A-SW, and ZUMLINK-JBOX-20A-PLUG. Bluetooth® functionality allows for configuration of the room via the Zum app.
Zum Link Wired Technology
Zum Link technology allows for in-room lighting control through ZUMLINK-KP keypads and sensors wired to J-box load controllers. The ZUMLINK-KP connects via CAT5e cable (CBL-CAT5E-ZUMLINK-P) to a J-box load controller to provide within room lighting control of compatible loads.
Button Configurations
The ZUMLINK-KP is equipped with a single, white rocker button for switching or dimming control and is configurable with four, six, or eight pad printed or engravable button trees (sold separately). Replacement configurations are available in an almond, black, gray, red or white finish.
Easy Installation
Designed with flexibility and ease-of-use in mind, Zum wired keypads are preprogrammed so the keypad can be installed in a room along with Zum load controllers, occupancy or vacancy sensors, and a daylight sensor, and then used to control the lights in the room without programming. Room setup can be accomplished quickly through the Zum app. A finished installation requires a decorator-style faceplate (FP-G Series, sold separately).
- Provides control of one or more Zum® Wired J-Box Load Controllers
- RS485 communications for increased reliability
- Preprogrammed rocker button
- Configurable with four, six, or eight engraved or pad printed button trees (ZUMLINK-BTN4, ZUMLINK-BTN6, ZUMLINK-BTN8, not included)
- Powered by 24V Zum Link bus
- Two RJ-45 connections for device daisy-chaining
- Standard 3.5 in. (89 mm) deep electrical box installation
- Button tree and bezel available in almond, black, gray, red, and white finish
- Matching decorator-style faceplate required (FP-G Series, not included)
- Systems Controlled - Lighting
- Spec Sheet available - Yes
- Certifications: CSA, CEC, IECC, UL
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- DC Voltage: 24 Volts
- Depth: 1.28 in
- Height: 4.13 in
- Width: 1.50 in
- Product Weight: 0.31 lbs
- Color: White
- COMMUNICATIONS:
•Zum Link: (2) RJ-45 ports; Connects to Zum Link device for load control; Provides in-room device daisy-chaining
•Bluetooth: Bluetooth low energy, Version 4.0; Pairs with a mobile device running the Zum app - Controls and Indicators:
•Push button: (1) rocker button preprogrammed; Configurable with combinations of ZUMLINK-BTN4, ZUMLINK-BTN6, ZUMLINK-BTN8 in pad printed or engraved models, sold separately
•LED: (1) Green LED; Indicates On/Off status of connected load Lights briefly to indicate a button press - Humidity: 10% to 90% RH (noncondensing)
- Construction: Composition: Plastic housing and front faceMounting: Mounts in a 1-gang, 3.5 in. (89 mm) deep electrical box (not supplied)Faceplate: Requires a decorator style faceplate (FP-G Series, not supplied)
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/