The S&L Catalog
Saros Powered Stereo Sound Bar
Model: SAROS SB-200-P
- High-quality, full-range amplified stereo sound bar
- Delivers enhanced sound quality and performance for use with any flat panel display
- Mounts to a wall or sits on a shelf
- Balanced or unbalanced stereo line-level audio input
- Unbalanced stereo audio cable included
The Saros® SB-200-P is a stereo sound bar designed to provide enhanced audio performance for a flat panel display. Its full-range, front-firing speakers offer an improvement over the small, rear-facing speakers typical of many display devices. The bracket included with the sound bar allows for attachment to a wall surface, or the unit can be placed on a shelf below or above the display.
Built-in amplification allows for direct connection to the line-level audio output of the display device, or to the output of an audio preamp, switcher, mixer, tv tuner, codec, or Crestron DM® receiver. The amplifier powers on automatically when an audio input signal is detected, and powers off if no signal is detected for several minutes.
The SAROS SB-200-P sound bar is ideally suited for use with the Crestron RL® 2 Group Collaboration System and other unified communication and videoconferencing systems. It is equally well-suited for use in any small to medium sized room or public space in a hotel, restaurant, museum, medical center, airport, office building, or residence.
- High-quality, full-range amplified stereo sound bar
- Delivers enhanced sound quality and performance for use with any flat panel display
- Mounts to a wall or sits on a shelf
- Balanced or unbalanced stereo line-level audio input
- Unbalanced stereo audio cable included
- Powers on and off automatically
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 41 F
- Depth: 2.78 in
- Height: 4.18 in
- Width: 40.60 in
- Product Weight: 7.80 lbs
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 50 Watt
- Maximum SPL (Sound Pressure Level): 83 dB
- Speaker Diameter (Driver): 3 in
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 100 Hz
- Minimum Frequency Response (Bandwidth): 0.10 kHz
- Construction: Plastic Housing with Perforate Metal Grille
- Color: Black
- Features and Performance:
•Woofers: (2) 3-inch (76mm) polypropylene cone with rubber surround
•Passive Radiators: (2) 3 x 4-3/8-inch (76x112mm) polypropylene cone with rubber surround
•Tweeters: (2) 1-inch (25mm) polyester dome
•Amplifier Power: 20 Watts per channel, stereo
•Frequency Response: 100Hz to 20kHz (+/-3dB)
•Output Sensitivity: 83dB SPL at 1 meter, both channels driven at 1 Watt each
•Input Sensitivity: 0.75Vrms per channel for full rated output
•Go To Sleep Time: 20 minutes (+/-5 minutes) with no signal present
•Wake Threshold: 5mV (+/-2mV) typical - Connectors:
•BALANCED AUDIO INPUTS: (1) 5-pin 3.5 mm detachable terminal block
•Balanced stereo line-level audio input
•Maximum Input Level: 0.85 Vrms
•Input Impedance: 10k Ohms
•UNBALANCED AUDIO INPUTS: (2) RCA connectors, female
•Unbalanced stereo line-level audio input
•Maximum Input Level: 0.85 Vrms
•Input Impedance: 10k Ohms
•NOTE: Right-angle plugs may be required for wall mount applications. A 59 inch (150 cm) right-angle RCA to straight RCA stereo cable is included.
•100-240V~50/60Hz 50W: (1) IEC 60320 C8 main power inlet
•Mates with removable power cord, included - Construction:
•Enclosure: Plastic housing with perforate metal grille, black
•Mounting: Freestanding or wall mount (bracket included)
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/