The S&L Catalog
DM Lite HDMI Over CATx Wallplate Transmitter and 2x1 Auto-switcher with VGA and Analog Audio, Black Textured
Model: HD-TX-201-C-2G-E-B-T
- Pairs with a DM Lite receiver to provide a simple point-to-point signal extender and switcher
- Enables extension of HDMI® video and audio signals
- Also converts and extends VGA and analog audio signals
- Auto-switches between one HDMI input and one VGA input
- Links to the receiver via a single CAT5e (or better) twisted pair cable
Pairs with a DM Lite receiver to provide a simple point-to-point signal extender for HDMI® signals up to UHD and 4K. Provides auto-switching HDMI, VGA, and stereo analog audio inputs.
Overview:
The HD-TX-201-C-2G-E (-B-T or -W-T) is a wall plate DM Lite transmitter designed to pair with a DM Lite receiver to form a point-to-point signal extender for HDMI® signals. The DM Lite family of products offers a very simple and versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or better) cable. A cable length of up to 230ft (70m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130ft (40m) for UHD and 4K.
In addition to its HDMI input, the HD-TX-201-C-2G-E also includes a VGA input accompanied by a stereo analog audio input. Auto-switching between HDMI and VGA affords plug-and-play simplicity. Manual input selection is also available using the front panel "INPUT SEL" button. The VGA input can accept RGB and component video signals by using an appropriate breakout cable or adapter (not included). The audio input is selected in tandem with the VGA input, and can be used by itself with no video source connected. It cannot be paired with the HDMI video input however.
A CAT6a RJ45 courtesy jack is included to provide a 1000Base-T network connection for computers and other devices. The front panel jack simply passes through to a parallel jack on the rear, which connects to an available port on the customer' LAN. This LAN jack is provided as a convenience to supplant the need for a separate RJ45 wall jack. It does not interface with the DM Lite system and cannot be used to extend Ethernet signals or interface with a control system.
The HD-TX-201-C-2G-E series comes in black or white, and is designed to mount in a 2-gang electrical box or plaster ring (not included). It is normally powered by the receiver over the link cable when using a surface mount receiver. If using a wall plate receiver, a single power pack must be purchased (sold separately, model TBA), which may be connected to either the transmitter or receiver.
Important - this product is not addressable from a control system and offers no programmable functionality except when paired with an HD-RX-201-C-E receiver. Otherwise, AV and CEC signals are simply passed through between the transmitter and receiver.
- Pairs with a DM Lite receiver to provide a simple point-to-point signal extender and switcher
- Enables extension of HDMI® video and audio signals
- Also converts and extends VGA and analog audio signals
- Auto-switches between one HDMI input and one VGA input
- Links to the receiver via a single CAT5e (or better) twisted pair cable
- Supports 4K and UHD at up to 130ft (40m)
- Supports HD 1080p, WUXGA, and 2K at up to 230ft (70m)
- Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
- Handles 3D video and Deep Color
- Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
- Compatible with HDMI, DVI, and Dual-Mode DisplayPort sources
- Compatible with VGA, RGBHV, RGBS, RGsB, and YPbPr component sources up to HD 1080p and WUXGA
- HDCP 1.4 compliant
- Passes CEC and EDID signals
- Allows control system integration when paired with an HD-RX-201-C-E receiver
- Courtesy LAN jack
- Flush wall mount design
- Installs in a 2-gang U.S. electrical box (2-1/4” deep) or plaster ring
- Decorator style faceplates sold separately (type FP-G2-DM only)
- Normally powered by the receiver (surface mount) over the link cable
- Universal 100-240V power pack available separately (coming soon) for use with a wall plate receiver
- Receiver/Transmitter Cable Type - HDMI
- Receiver/Transmitter Format Type - HDMI
- Supported Resolution - 4K (4096x2400)
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Transmission Range: 230 ft
- Certifications: CE, FCC
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Current Draw: 1.25 Amps
- DC Voltage: 24 Volts
- Depth: 1.92 in
- Height: 4.19 in
- Width: 3.50 in
- Product Weight: 0.56 lbs
- Color: Black
- Regulatory Compliance: HDCP
- Video:
•Switcher: 2x1 manual or auto-switching, audio-follow-video
•Input Signal Types: HDMI with Deep Color, 3D and 4K (DVI and dual-mode DisplayPort compatible), VGA/RGB (RGBHV, RGBS, RGsB), component (YPbPr)
•Copy Protection: HDCP 1.4 - Audio:
•Input Signal Types: HDMI (Dual-Mode DisplayPort compatible), analog stereo
•Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio, DTS:X, LPCM up to 8 channels
•Analog Formats: Stereo 2-channel
•Analog-To-Digital Conversion: 24-bit 48kHz
•Analog Performance:
•Frequency Response: 20Hz to 20kHz +/-0.75dB
•S/N Ratio: >90dB, 20Hz to 20kHz A-weighted
•THD+N: <0.006% at 1kHz
•Stereo Separation: >80dB - COMMUNICATIONS:
•HDMI: HDCP 1.4, EDID, CEC pass-through
•DM Lite Link: Proprietary link for connection between one DM Lite TX and RX only - Connectors:
•HDMI IN: (1) HDMI Type A connector, female
•HDMI digital video/audio input (DVI and Dual-Mode DisplayPort compatible)
•VGA IN: (1) HD15 connector, female
•RGB (VGA) or component video input
•Formats: RGBHV, RGBS, RGsB, YPbPr
•AUDIO IN: (1) 3.5 mm TRS mini phone jack
•Unbalanced stereo line-level audio input
•Maximum Input Level: 2Vrms
•Input Impedance: 44k ohms
•LAN (Front): (1) 8-pin RJ45 connector, female
•Passive pass-through to the rear panel LAN jack
•SERVICE (Right Side): (1) USB Type A connector, female for factory use only
•TO RX (rear): (1) 8-pin RJ45 connector, female, shielded
•Link port for connection to a DM Lite receiver
•24VDC 1.25A (rear): (2) Captive screw terminals
•24 Volt DC power input
•Power pack sold separately (if required, model TBA)
•LAN (Rear): (1) 8-pin RJ45 connector, female
•Passive pass-through to the front panel LAN jack
•Compatible Cable Standards: CAT5e, CAT6, CAT6a
•Low Level Contact Resistance: 100m-ohm maximum
•Insulation Resistance: 500m-ohm minimum at 500VDC
•Dielectric Withstanding Voltage: 1000VAC between contacts and shell
•Voltage Rating: 125VAC
•Current Rating: 1.5A
•PoE Compatibility: IEEE 802.3at PoE and PoE+
•Insertion Force: 22N maximum
•Retention Force: 76N minimum - Controls and Indicators:
•PWR: (1) Bi-color green/amber LED, indicates operating power is supplied from the RX via the DM Lite link or from a power pack via the 24VDC input, turns amber while booting and green when operating
•HDMI IN: (1) Bi-color green/amber LED, indicates HDMI input selection and signal presence
•VGA IN: (1) Bi-color green/amber LED, indicates VGA input selection and signal presence
•INPUT SEL: (1) Pushbutton for manual input selection, cycles through all available inputs on both the TX and RX
•AUTO: (1) Pushbutton to enable/disable auto-switching mode, and (1) green LED to indicate auto-switching mode is enabled
•SETUP: (1) Red LED and (1) recessed pushbutton for Ethernet setup (only when paired with an HD-RX-201-C-E receiver)
•LINK: (1) Green LED, indicates the DM Lite link status
•RESET: (1) Pushbutton for hardware reset (Resets both the TX and RX when paired with an HD-RX-201-C-E receiver)
•TO RX: (2) LEDs (on RJ45 connector), green LED indicates link status, amber LED indicates a valid video signal - Construction:
•Composition: Metal housing and bracket with black or white polycarbonate front label overlays
•Mounting: Mounts in a 2-gang, 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included)
•Faceplate: Requires a Crestron FP-G2-DM-B-T or FP-G2-DM-W-T faceplate (sold separately, other faceplates are incompatible)
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/