The S&L Catalog
4K Multiformat Switch and Receiver, 3 DM Lite and 2 HDMI Inputs, 1 HDMI Output
Model: HD-RX-4K-510-C-E
- 4K/60 4:2:0 capability
- Three DM Lite™ ports for interoperability with up to three DM Lite transmitters
- Two HDMI® inputs
- One HDMI output with 4K scaler
- Two stereo line level, two mono microphone, and one mono auxiliary audio input
The Crestron® HD-RX-4K-510-C-E multiformat switch and receiver provides enhanced HDMI® video switching and audio presentation capabilities in areas such as conference rooms and classrooms. Compatible with all DM Lite™ transmitters, the HD-RX-4K-510-C-E provides three DM Lite inputs for connection to up to three transmitters. A CAT5e (or higher) twisted pair cable connects a transmitter to the HD-RX-4K-510-C-E for the transmission of HDMI signals. For resolutions up to 2K, the maximum transmission distance is 230feet (70meters). For higher resolutions up to 4K, the maximum transmission distance is 130feet (40meters).
In addition to three DM Lite inputs, the HD-RX-4K-510-C-E provides two HDMI inputs that can be connected to local AV sources. Automatic switching among the five inputs can occur based on the last connected input. Switching behavior is configurable using the web interface or programmable using a Crestron control system. Input selection push buttons on the front panel of the HD-RX-4K-510-C-E also allow the desired input to be selected manually.
A single HDMI output with a built-in scaler connects to a display or other device with an HDMI input. Input resolutions are automatically scaled to match the native resolution of the display device, resulting in optimal image quality. For applications requiring comprehensive EDID management, the web interface can be used to ensure that every input is displayed at its optimal resolution and format. Input resolutions up to 4K60 4:2:0 are supported.
The HD-RX-4K-510-C-E provides enhanced audio capabilities. A built-in amplifier can drive a pair of 4 or 8ohm stereo speakers (25 watts per channel). The HD-RX-4K-510-C-E also provides 6x2 audio mixing capability. Embedded HDMI 2channel LPCM audio can be extracted from the selected DM Lite or HDMI input and combined with the five analog audio inputs (LINE 1, LINE 2, MIC 1, MIC 2, and AUX). Gain and mute sound adjustments can be made to each of the six inputs being mixed. The mixed audio is then transmitted as two audio outputs: one mirrored AUX 1, SPEAKER, HDMI mixer output and one AUX 2 output. Audio mixer settings such as volume and mute control are configurable for each of the two outputs independently.
Equipped with onboard control ports, the HD-RX-4K-510-C-E can control various devices in a room. ...
- 4K/60 4:2:0 capability
- Three DM Lite™ ports for interoperability with up to three DM Lite transmitters
- Two HDMI® inputs
- One HDMI output with 4K scaler
- Two stereo line level, two mono microphone, and one mono auxiliary audio input
- Built-in amplifier with 25W per channel for 4- or 8ohm stereo speakers
- Two stereo auxiliary outputs
- IR, RS-232, relay, and I/O control ports
- CEC (Consumer Electronics Control) capability
- 100/1000 Mbps Ethernet LAN connection
- Automatic switching of inputs
- 6x2 audio mixing capability
- Enterprise-grade security using IEEE 802.1X authentication
- EDID management
- HDCP management including HDCP 2.2 support
- Built-in web interface for easy configuration and monitoring
- Compatibility with a Crestron® 3-Series® (or later) control systems
- AV Framework™ technology support
- Compact surface- and rack-mount design
- Spec Sheet available - Yes
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Current Draw: 1 Amps
- Depth: 10.12 in
- Height: 1.73 in
- Width: 14.17 in
- Product Weight: 7.50 lbs
- Video:
•Switcher: 5x1 auto-switching or manual, audio-follow-video, Crestron Auto-Locking® and QuickSwitch HD™ technologies
•Scaler (HDMI Output): 4K video scaler with motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, content adaptive noise reduction, 3:2/2:2 pull-down detection and recovery
•Input Signal Types: HDMI with Deep Color and 4K (DVI and Dual-Mode DisplayPort™ compatible2) on Inputs 1-2, DM Lite with Deep Color and 4K on Inputs 3-5
•Output Signal Types: HDMI with Deep Color and 4K (DVI compatible3)
•Copy Protection: RTP, SRTSP, SDP
•Scaler Output Resolutions, HDMI: Auto (EDID preferred), 720p50, 720p60, 1080i25, 1080i30, 1080p30, 1080p25, 1080p24, 1080p50, 1080p60, 3840x2160 at 24Hz, 3840x2160 at 25Hz, 3840x2160 at 30Hz, 4096x2160 at 24Hz, 4096x2160 at 25Hz, 4096x2160 at 30Hz, 3840x2160 at 50Hz, 3840x2160 at 60Hz, 4096x2160 at 50Hz, 4096x2160 at 60Hz - Audio, General:
•Switcher/Mixer
•6x2 audio mixer:
•Audio Inputs: Two stereo 2channel LINE inputsTwo mono, 1channel MIC inputs, One,mono 1channel AUX input, One stereo 2channel LPCM stereo audio extracted from the selected HDMI or DM Lite input source
•Audio Outputs: One mirrored AUX 1, SPEAKER, and HDMI mixer output, stereo 2channel, One AUX 2 output, stereo 2channel
•Analog-to-Digital Conversion: 24bit 48kHz
•Digital-to-Analog Conversion: 24bit 48kHz
•Frequency Response, Analog Audio Outputs: 20Hz to 20kHz ±0.5dB (AUX outputs), 20Hz to 20kHz at full power ±3 dB (speaker output)
•S/N Ratio, Analog Audio Outputs: >95 dB at 10dBV, 20Hz to 20kHz, A-weighted (AUX outputs), >90 dB at 10dBV, 20 Hz to 20 kHz, A-weighted (speaker output)
•THD+N, Analog Audio Outputs: <0.005% at 1 kHz and 10dBV (AUX outputs), <0.3% at 1kHz and 10 dBV (speaker output)
•Stereo Separation, Analog Audio Outputs: 20Hz to 20kHz <=80dB (AUX outputs), 20Hz to 20kHz <=60dB (speaker output) - Audio, Microphone Inputs:
•Two balanced 1channel microphone inputs (MIC 1 and MIC 2)
•Input Signal Type: Mono analog
•Phantom Power: +48VDC, 12mA, enable or disable per channel
•Gain: 0dB to +60dB per channel in 1dB increments
•Mute: Enable or disable per channel - Audio, Line Inputs:
•Two balanced/unbalanced 2channel line inputs (LINE 1 and LINE 2)
•Input Signal Type: Stereo analog
•Balanced Line Input Level: 4Vrms
•Unbalanced Line Input Level: 2Vrms
•Gain: -20 dB to +20dB per input
•Line Input Impedance: >10kohms
•Mute: Enable or disable per input - Audio, Auxiliary Input:
•One balanced 1-channel auxiliary input (AUX):
•Input Signal Type: Mono analog
•Balanced Line Input Level 4Vrms
•Gain: -20dB to +20dB
•Line Input Impedance: >10kohms
•Mute Enable or disable - Audio, Source Inputs:
•Two HDMI and three DM Lite inputs (HDMI 1-2 and DM Lite 3- 5):
•Input Signal Types: HDMI (Dual-Mode DisplayPort compatible), DM Lite
•Digital Formats: 2channel LPCM - Audio Outputs:
•One mirrored SPEAKER, HDMI, and balanced/unbalanced AUX 1 mixer output:
•Output Signal Type/Format: Stereo 2 channel
•AUX 1 Output Impedance: 200ohms balanced, 100ohms unbalanced
•AUX 1 Maximum Output Level: 4Vrms balanced, 2Vrms unbalanced
•Selected Source: -80dB to +20dB level adjustment range plus Mute
•MIC 1-2: -80dB to +20dB level adjustment range plus Mute
•LINE 1-2: -80dB to +20dB level adjustment range plus Mute
•AUX: -80dB to +20dB level adjustment range plus Mute
•Master Volume: -80dB to +20dB level adjustment range plus Mono
•Amplifier Output Power: 25W RMS per channel at 8 ohms, 4ohms tolerant
•Amplifier Power: On or off
•Mute: Enable or disable independently for AUX 1, SPEAKER, and HDMI mixer output
•One balanced/unbalanced AUX 2 output:
•Output Signal Type/Format: Stereo 2-channel
•Output Impedance: 200ohms balanced, 100ohms unbalanced
•Maximum Output Level: 4Vrms balanced, 2Vrms unbalanced
•Selected Source: -80dB to +20dB level adjustment range plus Mute
•MIC 1-2: -80dB to +20dB level adjustment range plus Mute
•LINE 1-2: -80dB to +20dB level adjustment range plus Mute
•AUX: -80dB to +20dB level adjustment range plus Mute
•Master Volume: -80dB to +20dB level adjustment range plus Mono
•Amplifier Output Power: 25W RMS per channel at 8ohms, 4ohms tolerant
•Mute: Enable or disable for AUX 2 - COMMUNICATIONS:
•Ethernet: 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, CIP, DHCP, web browser setup and control
•RS-232: 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
•IR: 1-way device control via infrared up to 60 kHz
•HDMI: HDCP 2.2, EDID, CEC
•DM Lite: HDCP 2.2, EDID - Connectors:
•L/R, LINE INPUT 1-2: (2) 5-pin 3.5mm detachable terminal blocks
•MIC INPUT 1-2: (2) 3-pin 3.5mm detachable terminal blocks
•AUX INPUT: (1) 3-pin 3.5mm detachable terminal block
•HDMI INPUT 1 – 2: (2) HDMI Type A connectors, female; HDMI digital video/audio inputs;DVI and Dual-Mode DisplayPort compatible
•DM Lite INPUT 3-5: (3) 8pin RJ-45 yellow connectors, female, shielded; DM Lite input ports for connection to DM Lite transmitters
•L/R, AUX OUT 1-2: (2) 5pin 3.5mm detachable terminal blocks
•HDMI OUTPUT: (1) HDMI Type A connector, female; HDMI digital video/audio output; DVI compatible
•SPEAKER OUTPUT: (2) 2pin 7.62mm reversed gender 20A detachable terminal blocks, power amplifier outputs;Wire Size: Terminals accept up to 12 AWG (3.31mm); Output is direct-coupled—not transformer isolated
•I/O 1-2: (2) 2-pin detachable terminal blocks; Comprises 2 Versiport digital input/output or analog input ports (referenced to GND); Digital Input: Rated to 0-24VDC, input impedance 20kohms, logic threshold >3.125V low/0 and<1.875V high/1; Digital Ouput: 250mA sink from maximum 24VDC, catch diodes for use with "real world" loads; Analog Input: Rated for 0-10VDC, protected to 24 VDC maximum, input impedance 21k ohms with pull-up resistor disabled; Programmable 5 volts, 2k ohms pull-up resistor per pin
•RLY 1-2: (2) 2-pin detachable terminal blocks; Comprises 8 normally open, isolated relays; Rated 1amp, 30VAC/VDC; MOV arc suppression across contacts
•IR: (1) 2pin 3.5mm detachable terminal block; IR output control port; supports IR up to 60kHz; IRP2 emitter sold separately
•COM: (1) 5pin 3.5mm detachable terminal block; Bidirectional RS-232 port; Supports RS-232 up to 115.2k baud with hardware and software handshaking
•LAN: (1) 8pin RJ-45 connector, female; 100BASE-TX/1000BASE-T Ethernet port
•100-240V - 2.0A 50/60 Hz: (1) IEC 60320 C14 mains power inlet: Mates with removable power cord, included SERVICE: (1) USB Type Aconnector, female; For firmware loading - Controls and Indicators:
•PWR: (1) LED, indicates that power is being applied to the HDRX-4K-510-C-E. Amber indicates that the device is booting.Green indicates that the device is operational.
•INPUT 1-5: (5) Push buttons for manual input selection and (5) LEDs. Green indicates that video is detected and switched. Amber indicates that video is detected but is not switched.
•AUTO: (1) Push button to enable or disable automatic switching, and (1) green LED to indicate that automatic switching is enabled
•SETUP: (1) Red LED and (1) push button for display of IPaddress on the HDMI output
•DM Lite: (2) LEDs on RJ-45 connector. Right LED, green indicates that a DM Lite link is established. Left LED, flashing amber indicates non-HDCP video and solid amber indicates HDCP video.
•LAN: (2) LEDs on RJ-45 connector. Left LED, green indicates that an Ethernet link is established. Right LED, flashing amber indicates Ethernet activity. - Enclosure:
•Chassis: Metal, black finish, vented sides, 2 mounting flanges attached
•Mounting: Surface mount or 1RU 3/4 width rack mount (rack-mount kit sold separately)
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/