The S&L Catalog
4K Multiformat 2x1 AV Switch and Receiver with PoE+
Model: HD-RX-4K-210-C-E-POE
Part #: 6510861
- 4K/60 4:2:0 capability
- One DM Lite® port for interoperability with one DM Lite transmitter
- One HDMI® input
- One HDMI output with 4K scaler
- Gigabit Ethernet PoE+ powered device (PD) port
The Crestron® HD-RX-4K-210-C-E-POE is a multiformat AV switch and receiver that provides HDMI® video switching and audio presentation capabilities in areas such as conference rooms and classrooms. Compatible with all DM Lite® transmitters, the HD-RX-4K-210-C-E-POE provides one DM Lite input for connection to one transmitter. A CATx (CAT5e or higher) twisted pair cable connects a transmitter to the HD-RX-4K-210-C-E-POE for the transmission of HDMI signals. For resolutions up to 2K, the maximum transmission distance is 230 ft (70 m). For higher resolutions up to 4K, the maximum transmission distance is 130 ft (40 m).
Automatic Switching of Inputs
Automatic switching between the DM Lite input and HDMI input can occur based on the last connected input or on the routing priority assigned to each input. Switching behavior is configurable using the web interface or programmable using a Crestron control system. In addition, input selection push buttons on the front panel of the HD-RX-4K-210-C-E-POE enable the desired input to be selected manually.
HDMI Output with 4K Scaler
A single HDMI output with a built-in scaler connects to a display or other device with an HDMI input. Input resolutions are automatically scaled to match the native resolution of the display device, resulting in optimal image quality. For applications requiring comprehensive EDID management, the web interface can be used to ensure that every input is displayed at its optimal resolution and format. Input resolutions up to 4K60 4:2:0 are supported.
Gigabit Ethernet PoE+ Powered Device (PD) Port
The HD-RX-4K-210-C-E-POE includes a Gigabit Ethernet PoE+ PD port that can be connected to a PoE+ port on a Gigabit Ethernet switch. PoE+ eliminates the need for the HD-RX-4K-210-C-E-POE or the connected DM Lite transmitter to be connected to the PW-2412WU power pack (sold separately for the HD-RX-4K-210-C-E-POE).
- 4K/60 4:2:0 capability
- One DM Lite® port for interoperability with one DM Lite transmitter
- One HDMI® input
- One HDMI output with 4K scaler
- Gigabit Ethernet PoE+ powered device (PD) port
- Stereo line level audio output
- IR, RS-232, relay, and I/O control ports
- CEC (Consumer Electronics Control) capability
- Automatic switching of inputs
- EDID management
- HDCP management including HDCP 2.2 support
- Built-in web interface for easy configuration and monitoring
- Compatibility with Crestron® 3-Series® or later control systems
- .AV Framework™ technology support
- Crestron XiO Cloud™ service support
- Compact surface-mount design
- Supported Resolution - 1080p (1920x1080)
- Supported Resolution - WQXGA (2560x1600)
- Supported Resolution - Other
- Switcher Type - Audio
- Switcher Type - Video
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 10.50 Watt
- Current Draw: 1.25 Amps
- DC Voltage: 24 Volts
- Regulatory Compliance: CE, IC, FCC, UL
- Depth: 1.10 in
- Height: 5.11 in
- Width: 10.53 in
- Product Weight: 2.30 lbs
- Video:
•Switcher: 2x1 auto-switching or manual, audio-follows-video, Crestron Auto-Locking® and QuickSwitch HD™ technologies
•Scaler (HDMI Output): 4K video scaler with intelligent frame rate conversion, Deep Color support, content-adaptive noise reduction, 3:2/2:2 pull-down detection and recovery
•Input Signal Types: HDMI with Deep Color and 4K (DVI and Dual-Mode DisplayPort™ interface compatible3) on Input 1, DM Lite with Deep Color and 4K on Input 2
•Output Signal Types: HDMI with Deep Color and 4K (DVI compatible4)
•Copy Protection: HDCP 2.2 - Scaler Output Resolutions, HDMI: Auto (EDID preferred), 1280x720p at 50Hz (720p50), 1280x720p at 60Hz (720p60), 1920x1080i at 25Hz (1080i25), 1920x1080i at 30Hz (1080i30), 1920x1080p at 30Hz (1080p30), 1920x1080p at 25Hz (1080p25), 1920x1080p at 24Hz (1080p24), 1920x1080p at 50Hz (1080p50), 1920x1080p at 60Hz (1080p60), 3840x2160p at 24Hz, 3840x2160p at 25Hz, 3840x2160p at 30Hz, 4096x2160p at 24Hz, 4096x2160p at 25Hz, 4096x2160p at 30Hz, 3840x2160p at 50Hz, 3840x2160p at 60Hz, 4096x2160p at 50Hz, 4096x2160p at 60Hz
- Audio:
•Input Signal Types: HDMI (Dual-Mode DisplayPort interface compatible3), DM Lite
•Output Signal Types: HDMI, stereo analog
•Digital Formats: 2-channel LPCM
•Analog Formats: Stereo 2-channel
•Digital-to-Analog Conversion: 24-bit 48 kHz
•Output Impedance: 200 ohms balanced, 100 ohms unbalanced
•Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
•Output Volume: -80 to +20 dB level adjustment range plus Mute
•Mute: Enable or disable independently for HDMI and analog audio output
•Analog Output Performance: Frequency Response: 20 Hz to 20 kHz ±0.5 dB S/N Ratio: >95 dB at 10 dBV, 20 Hz to 20 kHz, A-weighted THD+N: <0.005% at 1 kHz and 10 dBV, Stereo Separation: 20 Hz to 20 kHz <80 dB
•Acoustic Noise: Not applicable (fanless) - COMMUNICATIONS:
•Ethernet: 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, CIP, DHCP, web browser setup and control
•RS-232: 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
•IR: 1-way device control via infrared up to 60 kHz
•HDMI: HDCP 2.2, EDID, CEC
•DM Lite: HDCP 2.2, EDID - Connectors:
•HDMI INPUT 1: (1) HDMI Type A connector, female; HDMI digital video/audio input; DVI and Dual-Mode DisplayPort interface compatible
•DM Lite INPUT 2: (1) 8-pin RJ-45 yellow connector, female, shielded; DM Lite input port for connection to a DM Lite transmitter
•HDMI OUTPUT: (1) HDMI Type A connector, female; HDMI digital video/audio output; DVI compatible
•AUDIO L/R: (1) 5-pin 3.5 mm detachable terminal block; Balanced/unbalanced stereo line-level audio output; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced; Output Impedance: 200 ohms balanced, 100 ohms unbalanced
•Ethernet: (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T Ethernet port PoE+ Powered Device (PD) port, IEEE 802.3at Type 2 PoE+ Class 4 (25.5 W) compliant
•I/O 1-2: (2) 2-pin detachable terminal blocks; Comprised of 2 Versiport digital input/output or analog input ports (referenced to GND); Digital Input: Rated to 0-24 VDC, input impedance 20k ohms, logic threshold >3.125 V low/0 and <1.875 V high/1; Digital Output: 250 mA sink from maximum 24 VDC, catch diodes for use with real world loads; Analog Input: Rated for 0-10 VDC, protected to 24 VDC maximum, input impedance 21k ohms with pull-up resistor disabled; Programmable 5 V, 2k ohms pull-up resistor per pin
•RELAY 1-2: (2) 2-pin detachable terminal blocks; Comprised of 2 normally open, isolated relays; Rated 1 A, 30 VAC/VDC; MOV arc suppression across contacts
•IR: (1) 2-pin 3.5 mm detachable terminal block; IR output control port; supports IR up to 60 kHz; IRP2 emitter sold separately
•COM: (1) 5-pin 3.5 mm detachable terminal block; Bidirectional RS-232 port; Supports RS-232 up to 115.2k baud with hardware and software handshaking
•24V 1.25A: (1) 2.1 x 5.5 mm DC power connector; 24 VDC power input; PW-2412WU power pack (optional, sold separately)
•SERVICE: (1) USB Type A connector, female; For factory use only - Controls and Indicators:
•PWR: (1) LED, indicates that power is being applied to the HD-RX-4K-210-C-E-POE from PoE+ or from the power pack connected to either the HD-RX-4K-210-C-E-POE or the transmitter. Amber indicates that the HD-RX-4K-210-C-E-POE is booting. Green indicates that the HD-RX-4K-210-C-E-POE is operational
•INPUT 1-2: (2) Push buttons for manual input selection and (2) LEDs. Green indicates that video is switched. Amber indicates that video is detected but is not switched
•AUTO: (1) Push button to enable or disable automatic switching, and (1) green LED to indicate that automatic switching is enabled
•SETUP: (1) Red LED and (1) push button for display of IP address on the HDMI output
•DM Lite: (2) LEDs on RJ-45 connector. Green indicates that a DM Lite link is established. Flashing amber indicates non-HDCP video, and solid amber indicates HDCP video
•Ethernet: (2) LEDs on RJ-45 connector. Green indicates that an Ethernet link is established. Flashing amber indicates Ethernet activity - Environmental:
•Humidity: 10% to 90% RH (non-condensing)
•Heat Dissipation: 35.8 BTU/hr - Enclosure:
•Chassis: Metal, black finish, vented sides, 2 mounting flanges attached
•Mounting: Surface or rack rail mount
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/