The S&L Catalog
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
1:4 HDMI Distribution Amplifier with 4K60 4:4:4 and HDR Support
Model: HD-DA4-4KZ-E
- Splits one HDMI® source to two outputs
- Handles 4K60 4:4:4 and HDR video signals
- Fully compatible with HD 1080p, UHD 4K and DCI 4K sources and displays
- Handles 3D video and Deep Color
- Handles Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X® and uncompressed 7.1 linear PCM audio
Product Info
Tech Specs
Related Products
Documents
The Crestron® HD- DA4-4KZ-E is a simple to use, high-performance 4K AV distribution amplifier designed to split a single HDMI® signal to feed two separate displays, switchers and/or other devices. It provides full support for UHD and DCI 4K60 4:4:4 and HDR video, HDCP 1.4 or 2.2 copy protection and high-bitrate 7.1 audio, to ensure optimal performance and compatibility for any HD or 4K video application. No programming or control system is required for operation.
- Splits one HDMI® source to two outputs
- Handles 4K60 4:4:4 and HDR video signals
- Fully compatible with HD 1080p, UHD 4K and DCI 4K sources and displays
- Handles 3D video and Deep Color
- Handles Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X® and uncompressed 7.1 linear PCM audio
- Selectable handling of HDCP 2.2 or HDCP 1.4
- EDID management options
- Input and output video presence indication
- No programming or control system required
- Thin profile - less than one inch deep
- Surface, shelf or single rack rail mountable
- External 100-240V universal power pack included
- DA Audio Input - HDMI (Embedded)
- DA Audio Output - HDMI (Embedded)
- DA Video Input - DVI
- DA Video Input - HDMI
- DA Video Input - Other
- DA Video Output - DVI
- DA Video Output - HDMI
- DA Video Output - Other
- Spec Sheet available - Yes
- COMMUNICATIONS:
•USB: USB 2.0 host; supports firmware update and custom EDID upload via a USB flash drive
•HDMI: HDCP and EDID (does not pass CEC)
•HDCP: Version Selectable for HDCP 2.2, 1.4 or OFF
HDCP encrypted content is blanked in OFF mode
•EDID Mode: Selectable for DEFAULT or COPY 1ST
The factory default EDID is 4K60 4:4:4 non-HDR video with 2-channel LPCM audio
The factory default EDID can be replaced with a custom EDID via USB
Sliding the switch from DEFAULT to COPY 1ST copies and stores the EDID from the device at OUTPUT 1 and passes it to the INPUT source device
Sliding the switch from COPY 1ST to DEFAULT erases the stored EDID and uses the factory default or custom EDID - Connectors:
•INPUT: (1) HDMI Type A connector, female
HDMI digital video/audio input[1]
(DVI and Dual-Mode DisplayPort compatible[2])
•OUTPUT 1-2: (2) HDMI Type A connectors, female
HDMI digital video/audio outputs[1]
(DVI compatible[2])
•SERVICE: (1) USB Type A connector, female
USB 2.0 host port
For firmware update and custom EDID upload via a USB flash drive
•24VDC 0.75A: (1) 2.1 x 5.5 mm DC power connector
24 Volt DC power input
PW-2407WU power pack included - Controls and Indicators:
•PWR: (1) Bi-color LED, indicates operating power is supplied via the power pack; illuminates amber while booting, green when operating
•SETUP: (1) Pushbutton and (1) red LED, restores factory settings
•RESET: (1) Recessed pushbutton for hardware reset
•INPUT: (1) Green LED, indicates video signal presence at the HDMI input
•OUTPUT 1 – 2: (2) Green LEDs, each indicates video signal transmission at the corresponding HDMI output
•HDCP (1) 3-position slide switch, selects the HDCP version (OFF, 1.4 or 2.2)
•EDID (1) 2-position slide switch, selects the EDID mode (DEFAUT or COPY 1ST) - Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Mount Type: Freestanding
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Current Draw: 0.75 Amps
- DC Voltage: 24 Volts
- Depth: 4.67 in
- Height: 0.87 in
- Width: 8.07 in
- Regulatory Compliance: CE, IC, FCC
HD-DA-2
- 1 x 2 HDMI Distribution Amplifier and Audio Converter
HD-DA-2-QUAD
- Quad 1-to-2 HDMI® Distribution Amplifier
HD-DA2-4KZ-E
- 1:2 HDMI Distribution Amplifier with 4K60 4:4:4 and HDR Support
HD-DA8-4KZ-E
- 1:8 HDMI Distribution Amplifier with 4K60 4:4:4 and HDR Support
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact S&L Integrated
close
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/
Contact in regards to this product:
Crestron Electronics, Inc.
Model: HD-DA4-4KZ-E
B2B INQUIRIES ONLY
Request more information from a dealer near you
close
Request more information from a dealer near you