The S&L Catalog
8 Channel 0-10 V Dimmer Module, Low Profile
Model: GLXP-DIMFLV8-LP
- 8 channels of 0-10 V dimming control
- Compatible with lighting and motor loads
- Support for 100-277 V applications
- 16 A load rating per channel
- Arc-less switching
The GLXP-DIMFLV8-LP is a Crestron Green Light® switching module that features 8 channels of 0-10 V dimming control. This module is part of a complete Crestron® engineered GLPS Green Light switching panel.
Override Input
An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset state. States can be set and saved locally from the front panel or remotely via software.
Cresnet® Communications
The GLXP-DIMFLV8-LP communicates with a Crestron control system using the Cresnet control network. A pair of Cresnet ports are provided on the GLXP-DIMFLV8-LP to allow easy daisy-chaining of several Crestron devices.
- 8 channels of 0-10 V dimming control
- Compatible with lighting and motor loads
- Support for 100-277 V applications
- 16 A load rating per channel
- Arc-less switching
- Positive air gap at each output
- Phase-independent channels
- Cresnet® communications
- Redundant power capability
- Local controls for testing and verification
- Local and remote override capability
- Non-volatile power failure memory
- GLEX cabinet installation
- CEC Title 24 2013 Compliant
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- AC Voltage (Maximum): 277 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 5 Watt
- DC Voltage: 24 Volts
- Certifications: CE, CEC, UL
- Depth: 3.26 in
- Height: 11.07 in
- Width: 9.50 in
- Load Ratings:
•Dimmer Channels: 8
•Per Channel: 16 A at 100-277 VAC, 50/60 Hz; 0.5 HP at 120 V, 1 HP at 230 V, 1 HP at 277 V
•Dim Load Types: 0-10 V fluorescent ballast or LED driver (4-wire); 60 mA max current sink
•Switch Load Types: Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent, high-intensity discharge (HID), motors
•Relay Lifetime: 1,000,000 on/off operations at full electronic ballast load - Connectors:
•NET: (2) 5-pin headers
•N1: (1) Terminal block; Line input neutral; Accepts 10-14 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
•L1-L8: (8) Terminal blocks; Line power inputs; Accepts 10-14 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
•SW1-SW8: (8) Terminal blocks; Switch channel outputs; Accepts 10-14 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
•0-10V DIM (-): (1) 8-position terminal block; Dim channel common; Galvanically isolated; May be wired as Class 1 or Class 2; Accepts 12-28 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
•0-10V DIM (+): (1) 8-position terminal block; Dim channel output; Galvanically isolated; May be wired as Class 1 or Class 2; Accepts 12-28 AWG wire; Torque to 4.43 lb-in. (0.5 Nm) - Controls and Indicators:
•NET ID: (2) 7-segment green LED digits and (2) miniature push buttons, sets Cresnet ID; Digits display output levels during local control
•SETUP: (1) Red LED and (1) recessed miniature push button, enables setup mode and touch-settable ID
•OVR: (1) Red LED and (1) miniature push button, enables override mode and saves presets
•PWR: (1) Green LED, indicates power status; Solid illumination indicates line power is applied to N1 and L1; Flashing indicates Cresnet power is supplied in absence of line power
•NET: (1) Yellow LED, indicates communication with control processor
•RESET: (1) Recessed miniature push botton, resets internal processor
•ON/OFF: (8) Red LEDs and (8) miniature push buttons, manually activates individual channels for dimming - Enclosure: The GLXP-DIMFLV8-LP module mounts in a GLEX enclosure with (2) integral mounting flanges
- Humidity: 10% to 90% RH (noncondensing)
- Heat Dissipation: 116 BTU/Hr
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/