The S&L Catalog
Cresnet Partition Sensor
Model: GLS-PART-CN
Part #: 6507062
- Sleek, compact design
- Adjustable infrared beam for high accuracy
- Sensing distance of up to 4 feet
- Cresnet® for power and communications
- Crestron® control system integration via Cresnet
The GLS-PART-CN has plug-in outputs and built-in time delays. Also, the partition sensor easily connects via Cresnet to a Crestron control processor to manage divisible room environments.
Cresnet
The GLS-PART-CN uses the dependable Cresnet wired network for communication between devices. Cresnet provides a simple solution for configuring and wiring sensors as part of any complete Crestron system. Cresnet is the communications backbone for Crestron lighting dimmers, keypads, shades, thermostats, and many other devices. This flexible 4-wire bus provides data communications and 24 Volts DC power for all of the devices on the Cresnet network.
Versatile Installation
The GLS-PART-CN has a white finish and can mount directly into finished ceilings. For droptile ceilings, the GLS-PART-CN installs into a 1-gang,3-1/2 inch deep electrical box. In both instances, a decorator-style faceplate[1] can be used to match the GLS-PART-CN with the color of the room. Only about 20 mm of the GLS-PART-CN is visible after installation, making it an unobtrusive addition to a room.
Digital Output
This sleek sensor delivers unparalleled versatility through an additional output on the terminal block, which can be used as an alternate method of integration with a Crestron Control System® or other system. The 5th pin of the Cresnet connector provides either a 24 Volt, 10 mA output or a closure to ground, perfect for connection with a Versiport or digital input port.
- Sleek, compact design
- Adjustable infrared beam for high accuracy
- Sensing distance of up to 4 feet
- Cresnet® for power and communications
- Crestron® control system integration via Cresnet
- Digital output provides either a 24 Volt, 10 mA output or a closure to ground
- Visible LED display that indicates sensor status
- Sensor Type - Current/Power
- Systems Controlled - Displays
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): -13 F
- Active Power: 1 Watt
- Current Draw: 0.04 Amps
- DC Voltage: 24 Volts
- Depth: 1.35 in
- Height: 2.23 in
- Width: 4.16 in
- Product Weight: 0.21 lbs
- Warranty (Length/Type): 3 Years Limited
- Sensing:
- Method of Detection: diffuse reflective
- Light Source: pulse modulated infrared LED
- IR Sensitivity: adjustable
- Sensing Distance: 4 ft (122 cm)
- Connectors:
- NET/EXT:
- (1) 5-pin 3.5mm detachable terminal block
- Cresnet® slave port and digital output port
- Digital output: provides either 24 Volts DC, 10mA (default) or a closure to ground when partition is detected
- NET/EXT:
- Controls & Indicators:
- PWR: (1) green LED, indicates power is supplied to device; flashes to indicate sensitivity level
- NET: (1) yellow LED, indicates Crenset communication status
- ALIGN: (1) red LED, indicates partition detection
- +: (1) pushbutton, used to increase sensitivity of IR beam; also used for touch-settable ID (TSID)
- -: (1) pushbutton, used to decrease sensitivity of IR beam; also used for touch-settable ID (TSID)
- Housing:
- Construction: plastic
- Mounting: surface mount; 1-gang mountable in a 3-1/2 inch deep electrical box, fits decorator-style faceplate
- NOTES:
- 1. Sold separately.
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/