The S&L Catalog
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
DIN Rail High-voltage Switch with Digital Inputs
Series: Green Light
Model: DIN-8SW8-I
Part #: 6503776
- 8 channels of power switching
- 8 voltage-driven isolated digital inputs
- Support for 120 to 240 Volt 50/60 Hz lighting and motor loads
- Override input
- Cresnet® communications
Product Info
Tech Specs
Related Products
Documents
The DIN-8SW8-I is an 8-channel lighting control module designed to support non-dimmable lighting and fan switching. In addition, the DIN-8SW8-I features eight isolated digital inputs, allowing standard momentary switches to trigger events with or without a control system. A single model supports both 120 and 220-240 Volt applications. Each channel handles incandescent loads up to 10 Amps, fluorescent loads up to 5 Amps, and 1/2 HP motor loads.
Override Input
An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset state. States can be set and saved locally from the front panel or remotely via software.
Isolated Local Inputs
The DIN-8SW8-I provides eight isolated local inputs, allowing momentary pushbutton keypads to be used. By default, a momentary voltage applied to each input will cause the associated relay to toggle on/off. In addition, the attached Crestron® control system can override this behavior and create eight general-purpose inputs. In this mode, pushbutton keypads can be programmed to provide customized functionality.
DIN Rail Installation
The DIN-8SW8-I is designed to snap onto a standard DIN rail for installation in a wall-mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom of the unit, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-8SW8-I's front panel stays accessible while the connections are concealed.
Cresnet®
The DIN-8SW8-I communicates with a Crestron control system via the Cresnet control network. A pair of Cresnet ports is provided on the DIN-8SW8-I for easy daisy-chaining of several DIN Rail Series automation control modules.
Override Input
An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset state. States can be set and saved locally from the front panel or remotely via software.
Isolated Local Inputs
The DIN-8SW8-I provides eight isolated local inputs, allowing momentary pushbutton keypads to be used. By default, a momentary voltage applied to each input will cause the associated relay to toggle on/off. In addition, the attached Crestron® control system can override this behavior and create eight general-purpose inputs. In this mode, pushbutton keypads can be programmed to provide customized functionality.
DIN Rail Installation
The DIN-8SW8-I is designed to snap onto a standard DIN rail for installation in a wall-mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom of the unit, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-8SW8-I's front panel stays accessible while the connections are concealed.
Cresnet®
The DIN-8SW8-I communicates with a Crestron control system via the Cresnet control network. A pair of Cresnet ports is provided on the DIN-8SW8-I for easy daisy-chaining of several DIN Rail Series automation control modules.
- 8 channels of power switching
- 8 voltage-driven isolated digital inputs
- Support for 120 to 240 Volt 50/60 Hz lighting and motor loads
- Override input
- Cresnet® communications
- Setup via front panel or software
- Programmable functionality
- 9M wide DIN rail mounting
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Current Draw: 0.23 Amps
- DC Voltage: 24 Volts
- Depth: 2.35 in
- Height: 3.71 in
- Width: 6.26 in
- Product Weight: 0.81 lbs
- Active Power: 5.40 Watt
- Load Ratings:
•Dimmer Channels:8
•Maximum Per Channel:10 Amps incandescent, 5 Amps fluorescent, 0.5 HP at 120 to 240 Volts AC, 50/60 Hz; 5 Amps at 30 Volts DC; 16 Amps Resistive
•Module Total:80 Amps incandescent, 40 Amps fluorescent at 120 to 240 Volts AC, 50/60 Hz
•Load Types:Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent, motor - Connections:
•1 - 8:(8) Sets of (2) captive screw terminals;
•Isolated Class 1 SPST relay switch circuits 1 - 8;
•Relay Rating: 10 Amps incandescent, 5 Amps fluorescent, 16 Amps resistive, 0.5 HP at 240 Volts AC (per channel);
•Maximum Wire Size: 12 AWG (2.5 mm²)
•INPUTS 1 - 8:(9) 3.5 mm detachable terminal blocks (inputs 1-8, common);
•Rated for 12-24 Volts DC; Input Impedance: 6.8k Ohms
•NET:(2) 4-pin 3.5mm detachable terminal blocks, paralleled;
•Cresnet® slave port
•OVERRIDE:(2) 2-pin 3.5mm detachable terminal blocks, paralleled;
•Sensing input for external low-voltage contact closure;
•Activates override mode when a closure is present;
•Minimum Closure Rating: 10mA (per module) at 24 Volts - Controls & Indicators:
•1 - 8:(8) Red LEDs and (8) miniature pushbuttons for status indication and local control of each channel
•NET ID:(2) 7-segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID
•SETUP:(1) Red LED and (1) recessed miniature pushbutton for enabling Setup mode and entering touch-settable ID
•OVR:(1) Red LED and (1) miniature pushbutton for enabling Override mode and saving override presets
•PWR:(1) Green LED, illuminates when DC power is applied to the NET port
•NET:(1) Yellow LED, indicates communication with the control processor
•RESET:(1) Recessed miniature pushbutton, resets internal processor - Enclosure: Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 9 DIN module spaces (162mm)
- Environmental:
•Humidity:10% to 90% RH (non-condensing)
•Heat Dissipation:18 BTU/hr
DIN-PWS60
- 60W DIN Rail Cresnet Power Supply
GL-EXP-DIM-CN
- Green Light Dimmer Expansion Module with Cresnet Communication
GL-EXP-DIMFDB-CN
- 3-wire Green Light Fluorescent Dimmer Expansion Module with Cresnet Communications
GL-EXP-DIMFLV-CN
- 1-channel Green Light Dimmer Independent Expansion Module
GL-EXP-DIMU-CN
- 1-channel Green Light Universal Dimmer Expansion Module with Cresnet Communication
ss_DIN-8SW8-I.pdf
806992 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact S&L Integrated
close
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/
Contact in regards to this product:
Crestron Electronics, Inc.
Model: DIN-8SW8-I
B2B INQUIRIES ONLY
Request more information from a dealer near you
close
Request more information from a dealer near you