The S&L Catalog
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
DIN Rail 0-10V Fluorescent Dimmer, 4 feeds, 4 channel
Series: Green Light
Model: DIN-4DIMFLV4
Part #: 6501749
- Provides 4 channels of 0-10 Volt dimming control
- Supports 120 and 220 to 240 Volt, 50/60 Hz applications
- Allows switching of lighting and exhaust fans[1]
- Includes an override input
- Communicates using Cresnet®
Product Info
Tech Specs
Related Products
Documents
The DIN-4DIMFLV4 is a 4-channel lighting control module designed to dim 0-10 Volt drivers and ballasts. A single model supports both 120 and 220 to 240 Volt applications. The DIN-4DIMFLV4 may also be used for switching of non-dimmable lighting loads up to 5 amps[1] and 1/2 HP motors.
Override Input:
An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset level. Levels can be adjusted and saved locally from the front panel or remotely via software.
DIN Rail Installation:
The DIN-4DIMFLV4 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-4DIMFLV4's front panel stays accessible while the connections are concealed.
Cresnet®:
The DIN-4DIMFLV4 communicates with Crestron® control systems such as the DIN-AP2 or DIN-AP3 Automation Processors via the Cresnet control network. Use one of the unit's two Cresnet ports to daisy-chain several DIN Rail Series automation control modules.
Override Input:
An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset level. Levels can be adjusted and saved locally from the front panel or remotely via software.
DIN Rail Installation:
The DIN-4DIMFLV4 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-4DIMFLV4's front panel stays accessible while the connections are concealed.
Cresnet®:
The DIN-4DIMFLV4 communicates with Crestron® control systems such as the DIN-AP2 or DIN-AP3 Automation Processors via the Cresnet control network. Use one of the unit's two Cresnet ports to daisy-chain several DIN Rail Series automation control modules.
- Provides 4 channels of 0-10 Volt dimming control
- Supports 120 and 220 to 240 Volt, 50/60 Hz applications
- Allows switching of lighting and exhaust fans[1]
- Includes an override input
- Communicates using Cresnet®
- Sets up via the front panel or through software
- Offers programmable functionality via DIN-AP2 or DIN-AP3
- Mounts on a 9M wide DIN rail
- CEC Title 24 2013 Compliant
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Height: 3.71 in
- Width: 6.26 in
- Product Weight: 0.57 lbs
- Wattage (max capacity): 1200 Watt
- Active Power: 4.20 Watt
- Current Draw: 0.18 Amps
- DC Voltage: 24 Volts
- Warranty (Length/Type): 3 Years Limited
- Certifications: CE, UL, CEC Title 24 2013 Compliant
- Load Ratings:
- Dimmer Channels :4
- Maximum Per Channel:
- 5 Amps @ 120 to 240 Volts AC, 50/60 Hz;
- 600 Watts @ 120 Volts AC;
- 1150 Watts @ 230 Volts AC;
- 1200 Watts @ 240 Volts AC, 0.5 HP;
- 16 Amps Resistive
- Module Total :
- 20 Amps @ 120 to 240 Volts AC, 50/60 Hz;
- 2400 Watts @ 120 Volts AC;
- 4600 Watts @ 230 Volts AC;
- 4800 Watts @ 240 Volts AC
- Dim Load Types :
- 0-10 Volt fluorescent or LED ballast (4-wire);
- Maximum of 30 fluorescent dimming ballasts
- Switch Load Types[1] :Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent, motors
- OUTPUT 1 – 4
- (2) 4-pin 3.5mm detachable terminal blocks comprising (4) isolated dimming control outputs;
- Voltage Control Range: 0 to 10 Volts DC;
- Maximum Sink Current: 60mA per channel;
- Output Resolution: 1024 levels (10 bit)
- 1 – 4
- (4) sets of (2) captive screw terminals;
- Isolated Class 1 SPST relay switch circuits 1 – 4;
- Relay Rating: 5 Amps maximum per channel;
- Maximum Wire Size: 12 AWG (2.5 mm²)
- NET
- (2) 4-pin 3.5mm detachable terminal blocks, paralleled;
- Cresnet® slave port
- OVERRIDE
- (2) 2-pin 3.5mm detachable terminal blocks, paralleled;
- Sensing input for external low-voltage contact closure;
- Activates override mode when a closure is present;
- Minimum Closure Rating: 10mA (per module) at 24 Volts
- 1 – 4 :(4) Red LEDs and (4) miniature pushbuttons for status indication and local control of each channel
- NET ID : (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID; digits also display output levels
- SETUP : (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID
- OVR : (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets
- PWR : (1) Green LED, illuminates when DC power is applied to the NET port
- NET : (1) Yellow LED, indicates communication with the control processor
- RESET : (1) Recessed miniature pushbutton, resets internal processor
- Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 9 DIN module spaces (162mm)
- Humidity : 10% to 90% RH (non-condensing)
- Heat Dissipation : 17 BTU/hr
- 1.May not be compatible with some high inrush current loads.
CLX-1DIMU4-HP
- 4-channel 1-feed Universal Dimmer Module, High Power, 120V
DIN-1DIM4
- DIN Rail Dimmer, 1 feed, 4 channels
DIN-1DIMU4
- DIN Rail Universal Dimmer, 1 feed, 4 channels
DIN-2LEDPWM8
- 2 Channel RGBW LED Dimmer, DIN Rail Mount
DIN-PWS60
- 60W DIN Rail Cresnet Power Supply
GL-EXP-DIM-CN
- Green Light Dimmer Expansion Module with Cresnet Communication
GL-EXP-DIMFDB-CN
- 3-wire Green Light Fluorescent Dimmer Expansion Module with Cresnet Communications
GL-EXP-DIMFLV-CN
- 1-channel Green Light Dimmer Independent Expansion Module
GL-EXP-DIMU-CN
- 1-channel Green Light Universal Dimmer Expansion Module with Cresnet Communication
din-4dimflv4.pdf
856 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact S&L Integrated
close
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/
Contact in regards to this product:
Crestron Electronics, Inc.
Model: DIN-4DIMFLV4
B2B INQUIRIES ONLY
Request more information from a dealer near you
close
Request more information from a dealer near you