The S&L Catalog
230VAC Wireless Motor Controller
Model: CLCI-MCEX-W
Part #: 6508043
- 1-channel bidirectional motor controller
- Provides control of window shutters, shades, and other equipment
- Compact surface-mount design for new or retrofit applications
- No special wiring—installs inline at the device
- Rated 2.5A FLA, 15A LRA at 230VAC
The Crestron® CLCI-MCEX-W is a single-channel bidirectional motor controller capable of controlling 230V window shutters, shades, projection screens, lifts, and other equipment. Its ultra-slim design allows it to be installed in the ceiling, either next to or near the motor. The CLCI-MCEX-W communicates with the Crestron control system using infiNET EX® wireless technology, making it perfect for both new and retrofit applications.
The CLCI-MCEX-W installs inline without requiring special wiring and can be controlled via a standard light switch.
Bidirectional Motor Control
The CLCI-MCEX-W supports control of bidirectional motors. Two sets of screw terminals enable easy wiring to the motor for open and close control.
Easy Loop-Thru Wiring
The CLCI-MCEX-W is powered using a set of high-voltage screw terminals and has a second set of terminals that are wired in parallel to easily daisy-chain additional CLCI-series devices. This provides a fast, clean installation when deploying multiple CLCI- devices and eliminates the need for additional wire connectors or extra gang boxes. In some retrofit applications, this lets you create more zones from what was originally wired.
Out-of-the-box Control via Standard Switch
The CLCI-MCEX-W provides built-in support for applications that require basic load control using a cost effective maintained or momentary switch to control the load. Use a maintained or momentary switch to perform basic open and close control.
Complete Crestron Control
A Crestron control system connection allows the CLCI-MCEX-W to be controlled from any keypad, touch panel, remote, or mobile device. Tie in occupancy sensors and photocells together with Crestron Fusion® software for a complete solution to effectively manage energy.
Simple Setup
Setup is simple, especially when using a connected maintained or momentary switch. A specific series of button presses initiates the wireless device acquire mode, so there's no need to climb a ladder to join the device to the infiNET EX network.
- 1-channel bidirectional motor controller
- Provides control of window shutters, shades, and other equipment
- Compact surface-mount design for new or retrofit applications
- No special wiring—installs inline at the device
- Rated 2.5A FLA, 15A LRA at 230VAC
- infiNET EX® wireless communication ensures reliable operation
- Local controls for setup and testing
- Built-in support for control via standard momentary or maintained switch
- Setup via on-board button or connected switch
- Daisy-chain units for easy deployment
- Operates using 230VAC power
- Captive screw terminal connections
- Systems Controlled - Lighting
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: CE
- AC Voltage: 230 Volts
- Current Draw: 15 Amps
- Depth: 7 in
- Height: 1.61 in
- Width: 2.13 in
- Product Weight: 0.44 lbs
- Wireless: Yes
- Load Control:
•Switched Load Types: Bidirectional motor
•Motor Control Channels: One channel comprised of two interlocking switched outputs, one for “raise/open” and one for “lower/close”
•Load Rating: 2.5 Amps FLA, 15 Amps LRA, for use with loads having a power factor of 0.50 or greater - Connections:
•L: (3) Captive screw terminals, paralleled, Live power input and hardwire pass-throughs
•N: (4) Captive screw terminals, paralleled, Neutral connections
•G: (2) Captive screw terminals, paralleled, Ground connections
•R: (1) Captive screw terminal, Remote control switch input (230V SPST normally-open momentary or maintained contact)
•SW1: (1) Captive screw terminal, raise/open switched load output
•SW2: (1) Captive screw terminal, lower/close switched load output
•Each terminal accepts a single 1-2.5mm2 (18-14 AWG) conductor - Controls and Indicators:
•Setup: (1) Pushbutton, for manual operation and wireless network setup
•Chan. 1: (1) Green LED, indicates raise/open output is switched on, also used for setup
•Chan. 2: (1) Green LED, indicates lower/close output is switched on, also used for setup - Wireless Communications:
•RF Transceiver: infiNET EX 2-way RF, 2.4GHz ISM channels 11-26 (2400 to 2483.5MHz), default channel 15; IEEE 802.15.4 compliant, AES-128 encryption
•Range (typical): 15m (50ft) to gateway or nearest mesh network device(s), subject to site-specific conditions and individual device capabilities, range between floors or ceilings is limited to one level
•Gateway: Requires an infiNET EX gateway - Construction:
•Plastic surface-mount housing, suitable for installation in a non-plenum ceiling space
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/