The S&L Catalog
Universal Wireless Gateway - ER, SG and infiNET EX Wireless Networks, International Version
Model: CENI-GW1
Part #: 6511029
- Universal wireless gateway adds the SG (Sub GHz) wireless network to the proven performance of the infiNET EX mesh network and Extended Range ER wireless network
- Supports Crestron battery-powered shades
- Dynamic discovery for fast, easy setup
- Wi-Fi® friendly channel selection for trouble-free operation
- Built-in energy scan tool to help select wireless channel
The CENI-GW1 is a universal wireless gateway that communicates with Crestron® SG (Sub GHz), ER (Extended Range), and infiNET EX® wireless devices. A single CENI-GW1 creates SG, ER, and infiNET EX® wireless networks to facilitate 2-way communication between a Crestron® control system and a network of Crestron wireless remotes, keypads, lighting dimmers, motorized shades, thermostats, door locks, and other wireless devices.
Universal Wireless Gateway
The universal wireless gateway features 2-way wireless communication between the gateway and wireless devices. The CENI-GW1 can manage SG wireless, infiNET EX® wireless, and ER (Extended Range RF) devices simultaneously, eliminating the need for separate gateways.
Easy Setup
The CENI-GW1 makes it easy to set up a network of wireless devices by eliminating the need for separate gateways, antennas, and LAN connections. Additionally, Crestron wireless devices are discovered and acquired in one simple step.
Power over Ethernet for Simple Installation
Using PoE technology, a single cable run is used for both power and data for the CENI-GW1.
Power an entire network of Crestron PoE devices using a Crestron PoE switch (CEN-SW-POE-5 or CEN-SWPOE-16) or a single device using a PoE Injector (PWE-4803RU). All PoE injectors and switches are sold separately.
As an alternative to PoE, use a 24VDC power pack (PW-2407WU, sold separately) to power the CENI-GW1.
Integrator Friendly Enclosure
Mount the CENI-GW1 almost anywhere using the Integrator Friendly Enclosure (IFE). The IFE can be mounted to any flat surface, snapped onto a standard DIN rail, or stacked on other IFE compliant devices. Rack mount and pole mount kits are also available.
- Universal wireless gateway adds the SG (Sub GHz) wireless network to the proven performance of the infiNET EX mesh network and Extended Range ER wireless network
- Supports Crestron battery-powered shades
- Dynamic discovery for fast, easy setup
- Wi-Fi® friendly channel selection for trouble-free operation
- Built-in energy scan tool to help select wireless channel
- Extend infiNET EX wireless coverage with infiNET EX expanders2
- Extend ER wireless coverage with the built-in ER device roaming capabilities
- Mount the antennas remotely using the ANT-EXT-10 (one required for each antenna, sold separately)
- Power using PoE or 24VDC power pack
- Integrator Friendly Enclosure (IFE) can be mounted to a flat surface, a DIN rail, or stacked on other IFE compliant devices; rack and pole mount options are also available (sold separately)
- Rackmountable - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 41 F
- Certifications: UL, CE, RCM, FCC, IC, WEEE
- Wireless: Yes
- Active Power: 5.30 Watt
- Current Draw: 0.75 Amps
- DC Voltage: 24 Volts
- Depth: 5.17 in
- Height: 1.77 in
- Width: 5.36 in
- Product Weight: 0.37 lbs
- Color: Black
- Wireless Communications:
•Transceiver: infiNET EX Transceiver: 2-way RF, 2.4 GHz ISM; Channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant; Mesh network topology; infiNET EX devices act as expanders; Dedicated infiNET EX expanders are also available (CLW-EXPEX, sold separately)
•ER Transceiver: 2-way RF, 2.4 GHz ISM; Channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant; Star network topology; ER devices can roam between up to eight gateways; Additional gateways act as range extenders (sold separately)
•SG Transceiver: 2-way RF; Channels 0-33 (863.125 to 869.725 Mhz; SG channels are scanned after a factory restore, the best channel is selected; Star network topology
•Transmit Power: : infiNET EX and ER: +19 dBm; SG: +27 dBm
•Range: infiNET EX: 150 ft (46 m) indoor (250 ft (76 m) outdoor) to nearest mesh network device(s); ER: 100 to 200 ft (31 to 61 m) maximum indoor (1,000 ft (305 m) outdoor) to ER wireless device; SG: 230 ft (70 m) indoor (656 ft (200 m) outdoor) to SG wireless device - Supported Devices: Supports Crestron and third-party infiNET EX devices, Crestron ER wireless devices, Crestron SG devices, and Crestron infiNET EX expanders
- Wired Communications:
•Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, IEEE 802.3at Type 1 compliant - Controls and Indicators:
•PWR: (1) Bi-color green/amber LED; Green indicates operating power is being supplied via PoE or 24VDC; Amber indicates that the device is booting
•ACT EX/ER: (1) Green LED; Indicates infiNET EX and ER wireless RX and TX data activity
•ACT SG: (1) Green LED; Indicates SG wireless RX and TX data activity
•ACQUIRE: (1) Recessed pushbutton with red LED: Used to enter Acquire mode to pair wireless devices; Press to enter and exit Acquire mode
•SETUP: (1) Recessed pushbutton with red LED, Used to set up connection with the control system via Ethernet; To factory reset the gateway, press and hold SETUP until the SETUP LED flashes 6 times.
•RESET: (1) Recessed pushbutton; To reboot the gateway, press and hold RESET for 8 seconds.
•LAN PoE: (1) Green and (1) Amber LED; Green indicates Ethernet link status; Amber indicates Ethernet activity - Connectors:
•ANTENNA EX/ER: (1) Connection for supplied EX/ER antenna or antenna extender
•ANTENNA SG: (1) Connection for supplied SG antenna or antenna extender; Gray bands around the top
•COMPUTER: (1) Micro-B USB female; Computer console port, installer use only; For setup and firmware upgrades
•G: (1) 4-40 screw, chassis ground lug
•24VDC 0.75A: (1) 2.1 x 5.5 mm DC power connector; 24VDC power input; PW-2407WU power pack sold separately
•LAN PoE: (1) 8-pin RJ-45, female; 10BASE-T/100BASE-TX Ethernet port; Power over Ethernet compliant - Humidity: 10% to 90% RH (noncondensing)
- Heat Dissipation: 18.1 BTU/hr
- Construction:
•Enclosure: IFE small form factor, black and blue plastic with die-cast zinc top cover
•Mounting: Freestanding, stackable, surface mount, or 35 mm DIN EN 60715 rail mount; Occupies 8 DIN module spaces (144 mm); Surface/DIN rail mounting bracket included; Rack mount and pole mount kits sold separately
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/