The S&L Catalog
Wi-Fi Network I/O Extender with 4 Digital Inputs
Model: CEN-IO-DIGIN-204
Part #: 6507971
- Compact, cost-effective wireless network I/O extender
- Communicates to the local network over Wi-Fi® wireless communications
- Up to five wireless access points can be memorized
- Provides four digital inputs
- Installer setup via Crestron Toolbox™ software or web browser
The Crestron® CEN-IO-DIGIN-204 is a compact and cost-effective wireless I/O extender designed to easily expand the available digital inputs within a commercial or residential system. A small form factor allows the CEN-IO-DIGIN-204 to be placed just about anywhere, with the option to attach it to a flat surface or DIN rail using the included mounting bracket. The four onboard digital inputs enable direct integration with all kinds of third-party equipment.
The CEN-IO-DIGIN-204 communicates to the local network over Wi-Fi® wireless communications, allowing the connected equipment to be remotely controlled and monitored from a computer or tablet. Power is conveniently supplied to the CEN-IO-DIGIN-204 via an included 5 VDC power pack.
- Compact, cost-effective wireless network I/O extender
- Communicates to the local network over Wi-Fi® wireless communications
- Up to five wireless access points can be memorized
- Provides four digital inputs
- Installer setup via Crestron Toolbox™ software or web browser
- Supports TLS 1.2 and Local Authentication security protocols
- Powered via included 5 VDC power pack
- Compact, stackable IFE micro form factor
- Surface or DIN rail mountable
- Available rack mount and pole mount options
- Warranty - Yes
- Spec Sheet available - Yes
- Depth: 2.86 in
- Height: 1.35 in
- Width: 5.04 in
- Regulatory Compliance: FCC Part 15 Class B digital device
- DC Voltage: 5 Volts
- Product Weight: 6.40 lbs
- Active Power: 0.70 Watt
- Warranty (Length/Type): Limited
- Certifications: UL® Listed for US and Canada, CE, IC
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 41 F
- Current Draw: 1.20 Amps
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- WIRELESS COMMUNICATION:
•Transceiver: IEEE 802.11a/b/g/n Wi-Fi (2.4 or 5 GHz 2-way RF), static IP or dynamic IP via DHCP
•Security: 64 and 128-bit WEP, WPA and WPA2-PSK with TKIP and AES
•Range: Up to 50 ft (15 m), subject to site-specific conditions
•Gateway: Requires an 802.11a/b/g/n wireless access point and Ethernet-enabled Crestron control system - Connectors:
•Digital IN : (1) 5-pin 3.5 mm detachable terminal block; Comprises (4) digital inputs (referenced to GND); Input Voltage Range: 0–24 VDC; Logic Threshold: >2.0 VDC 0/low, <0.6 VDC 1/high; Input Impedance: 2.2k Ohm pulled up to 5 V
•USB: (1) Micro-USB Type B console port; For setup via Crestron Toolbox™ software
•PWR: (1) 2-pin 3.5 mm detachable terminal block; 5 VDC power input for included power pack
•G: (1) 4-40 screw; Chassis ground lug - Controls and Indicators:
•PWR: (1) Bicolor green/amber LED, indicates that power is present, amber indicates that the device is booting and not yet ready to operate, green indicates that device is ready to operate
•ONLINE: (1) Green LED, indicates that the device is connected to a Crestron control system via Wi-Fi wireless communications
•SETUP: (1) Red LED and (1) recessed pushbutton for web setup, LED indicates that the SETUP pushbutton has been pressed (times out automatically) - Environmental:
•Humidity: 10% to 90% RH (noncondensing)
•Heat Dissipation: 2.4 BTU/hr - Construction:
•Enclosure: IFE micro form factor, black and blue plastic
•Mounting Freestanding, stackable, surface mount, or 35 mm DIN EN 60715 rail mount; Occupies 8 DIN module spaces (144 mm); Surface/DIN rail mounting bracket included, optional rack mount and pole kits sold separately
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/