The S&L Catalog
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
DXLink Multi-format Wallplate Transmitter
Model: DX-TX-WP-WH
Part #: FG1010-320-WH
- Only One Cable – Send audio and video, while passing Ethernet signals and power over one twisted pair cable
- Multi-Format Analog Port and HDMI Port – Supports legacy analog signals - RGBHV, Component, S-Video, and Composite, and digital HDMI/HDCP, DisplayPort++ and DVI signals
- Send HDMI signals up to 100 meters – Extend the reach of the HDMI signals far beyond the capabilities of typical HDMI cabling
- Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair cable, see the Cabling for Success with DXLink white paper for more details
- Power over DXLink Enabled – Designed for use with Enova DGX or DVX systems with DXLink inputs, PS-POE-AT-TC (FG423-84) or PDXL-2 (FG1090-170) to provide remotely located Power over DXLink (requires firmware v1.2.40 or above)
Product Info
Tech Specs
Related Products
Documents
Other Options
OVERVIEW
The DXLink Multi-Format Wallplate Transmitter sends analog or digital video including HDMI/HDCP, along with embedded audio or supplemental analog audio up to 100 meters to an Enova DGX Digital Media Switcher, compatible Enova DVX All-In-One Presentation Switcher, or directly to a DXLink Receiver. It receives Power over DXLink* from the Enova DGX, Enova DVX (3155HD, 3156HD or 2155HD), PS-POE-AT-TC High Power PoE Injector or PDXL-2 Dual Power over DXLink Controller over the twisted pair cable and features both a multi-format analog port to support legacy devices and an HDMI port to support newer digital devices.
COMMON APPLICATIONS
Mount the DXLink Multi-Format Wallplate Transmitter in the wall or lectern to connect guest equipment and send audio and video signals across the room, on the other side of the house or in a classroom down the hall. Since it is powered remotely, the wallplate can be installed virtually anywhere.
* Power must be supplied by one of the following DXLink Power sourcing devices: Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed), Compatible Enova DVX All-In-One Presentation Switcher (3155HD, 3156HD or 2155HD), PS-POE-AT-TC High Power PoE Injector or PDXL-2 Power over DXLink Controller. AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment.
The DXLink Multi-Format Wallplate Transmitter sends analog or digital video including HDMI/HDCP, along with embedded audio or supplemental analog audio up to 100 meters to an Enova DGX Digital Media Switcher, compatible Enova DVX All-In-One Presentation Switcher, or directly to a DXLink Receiver. It receives Power over DXLink* from the Enova DGX, Enova DVX (3155HD, 3156HD or 2155HD), PS-POE-AT-TC High Power PoE Injector or PDXL-2 Dual Power over DXLink Controller over the twisted pair cable and features both a multi-format analog port to support legacy devices and an HDMI port to support newer digital devices.
COMMON APPLICATIONS
Mount the DXLink Multi-Format Wallplate Transmitter in the wall or lectern to connect guest equipment and send audio and video signals across the room, on the other side of the house or in a classroom down the hall. Since it is powered remotely, the wallplate can be installed virtually anywhere.
* Power must be supplied by one of the following DXLink Power sourcing devices: Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed), Compatible Enova DVX All-In-One Presentation Switcher (3155HD, 3156HD or 2155HD), PS-POE-AT-TC High Power PoE Injector or PDXL-2 Power over DXLink Controller. AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment.
- Only One Cable – Send audio and video, while passing Ethernet signals and power over one twisted pair cable
- Multi-Format Analog Port and HDMI Port – Supports legacy analog signals - RGBHV, Component, S-Video, and Composite, and digital HDMI/HDCP, DisplayPort++ and DVI signals
- Send HDMI signals up to 100 meters – Extend the reach of the HDMI signals far beyond the capabilities of typical HDMI cabling
- Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair cable, see the Cabling for Success with DXLink white paper for more details
- Power over DXLink Enabled – Designed for use with Enova DGX or DVX systems with DXLink inputs, PS-POE-AT-TC (FG423-84) or PDXL-2 (FG1090-170) to provide remotely located Power over DXLink (requires firmware v1.2.40 or above)
- DXLink Direct Connection – When receiving Power over DXLink
- from the PS-POE-AT-TC or PDXL-2, DXLink Wallplates can be connected directly to a DXLink Receiver for a point-to-point solution
- Note:
- Power must be supplied by one of the following DXLink Power sourcing devices:
- Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed), Compatible Enova DVX All-In-One Presentation Switcher (3155HD, 3156HD or 2155HD), PS-POE-AT-TC High Power PoE Injector or PDXL-2 Power over DXLink Controller.
- AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment
- Receiver/Transmitter Cable Type - Twisted Pair
- Receiver/Transmitter Format Type - DVI
- Receiver/Transmitter Format Type - HDMI
- ROHS Compliant - Yes
- Supported Resolution - 1080i (1920x1080)
- Supported Resolution - 1080p (1920x1080)
- Supported Resolution - 720p (1280x720)
- Warranty - Yes
- Spec Sheet available - Yes
- Depth: 1.31 in
- Height: 4.69 in
- Width: 6 in
- Shipping Weight: 2.20 lbs
- Regulatory Compliance: WEEE, HDCP
- Product Weight: 1.40 lbs
- Warranty (Length/Type): 3 Years Limited
- Certifications: CE, FCC, UL
- Input Impedance (Audio): 10000 ohm
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- General:
- Compatible AMX Products
- Enova DGX 8/16/32/64 Digital Media Switchers
- Enova DVX-3155HD, DVX-2156HD and DVX-2155HD All-In-One Presentation Switchers
- AVB-RX-DXLINK-HDMI DXLink HDMI Receiver Module as a point-to-point solution (when Wallplates are powered by PS-POE-AT-TC or PDXL-2)
- PS-POE-AT-TC High Power PoE Injector
- PDXL-2 Power over DXLink Controller
- CC-USB, USB Programming Cable (FG10-5965)
- Airflow: Natural convection via air vent openings on front, back and top
- MTBF: 381,000 hours
- Transport Layer Throughput (Max): 10.2 Gbps
- Twisted Pair Cable Type: Shielded Cat6, Cat6A and Cat7
- DXLink twisted pair cable runs for DXLink equipment shall only be run within a common building where a common building is defined as: the walls of the structure(s) are physically connected and the structure(s) share a single ground reference
- Twisted Pair Cable Length: Up to 328 ft (100 m)
- Compatible AMX Products
- ACTIVE POWER REQUIREMENTS:
- DXLink Power:
- Power must be supplied by a DXLink Power sourcing device such as:
- Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed)
- Compatible Enova DVX All-In-One Presentation Switcher (3155HD, 3156HD or 2155HD)
- PS-POE-AT-TC High Power PoE Injector
- PDXL-2 Power over DXLink Controller
- Power must be supplied by a DXLink Power sourcing device such as:
- When installed in conjunction with an Enova DGX use the Enova DGX Configuration Tool located at AMX.com/enova to determine the power requirements of the configuration
- AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment. To use PS-POE-AT-TC or PDXL-2 as a power source the wallplates require firmware v1.2.40 or above.
- Power Connector: Included on DXLink Connection
- Power Consumption (Max): Power over DXLink Supplied 7 W
- DXLink Power:
- Power Supply:
- External, Required:
- Power must be supplied by a DXLink Power sourcing device such as:
- Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed)
- Compatible Enova DVX All-In-One Presentation Switcher (DVX-3155HD, DVX-3156HD or DVX-2155HD)
- PS-POE-AT-TC High Power PoE Injector
- PDXL-2 Power over DXLink Controller
- AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment.To use PS-POE-AT-TC or PDXL-2 as a power source the wallplates require firmware v1.2.40 or above
- Power must be supplied by a DXLink Power sourcing device such as:
- External, Required:
- Environmental:
- Temperature (Storage): -22° to 158° F (-30° to 70° C)
- Humidity (Operating): 5% to 85% RH (non-condensing)
- Humidity (Storage): 0% to 90% RH (non-condensing)
- Heat Dissipation (Max): Power over DXLink supplied: 24 BTU/HR
- Front Connectors:
- HDMI Input: HDMI Type A Female
- Analog Video Input: HD-15 (Breakout cable required for non RGB formats)
- Analog Stereo Input: 3.5mm Mini-Stereo Jack
- Advanced Configuration Interface: USB Mini-B Connector
- USB (HID) Keyboard & Mouse: USB Mini-B Connector
- SIDE CONNECTORS:
- ID Pushbutton:
- Toggle between DHCP and static IP addressing
- Places system in NetLinx Device ID assignment mode
- Reset the factory default settings
- Restore the factory firmware image
- Reset Pushbutton: Resets/reboots the CPU of the wallplate
- ID Pushbutton:
- Back Connectors:
- DXLink Output:
- RJ-45
- CONTROL
- Advanced Configuration Interface:
- USB Mini-B Connector
- DXLink Output:
- Indicators:
- Power Indicator:
- Green indicates whether or not the module is powered on
- USB (HID)
- USB (HID):
- (1) USB Mini A/B Connector (“HOST”)
- Use in conjunction with an Enova DGX Digital Media Switcher, connect a DXLink TX (twisted pair or fiber) to a PC and emulate keyboard and mouse commands from a DXLink Fiber Receiver (twisted pair or fiber)
- For a list of HID devices which have been tested and found to be working well with the latest firmware please view the document “DXLink HID Keyboard and Mouse Supported Devices”.
- Power Indicator:
- HDMI:
- Compatible Formats: HDMI, HDCP, DVI
- Input Signal Type:
- HDMI
- DVI-D (Single Link With Cable Adapter)
- DisplayPort ++ (Input Only, With HDMI Cable Adapter)
- Input Connector: HDMI Type A Female
- Propagation Delay (Typ): 5 us
- Input Voltage (Nominal): 1.0 Vpp Differential
- Input Re-clocking (CDR): Yes
- Input Equalization: Yes, Adaptive
- Data Rate (Max): 4.95 Gbps / 6.75 Gbps
- 6.75 Gbps supported when the DXLink HDMI RX Scaler is in Bypass mode and format is 1080p60 or less
- Pixel Clock (Max):
- 165 MHz / 225 MHz
- 225 MHz supported when the DXLink HDMI RX Scaler is in Bypass mode and format is 1080p60 or less
- Progressive Resolution Support: 480p up to 1920x1200 @ 60 Hz including but not limited to those resolutions shown in the DXLink Twisted Pair Transmitters/Receiver Instruction Manual
- Interlaced Resolution Support: 480i, 576i, 1080i including but not limited to those resolutions shown in the DXLink Twisted Pair Transmitters/Receiver Instruction Manual. If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler Bypass mode interlaced input will pass through
- Deep Color Support:
- 24-bit, 30-bit, 36-bit
- 30-bit, 36-bit supported when the DXLink HDMI RX Scaler is in Bypass mode and format is
- 1080p60 or less
- Color Space Support:
- RGB 4:4:4
- YCbCr 4:4:4 and 4:2:2 (Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4)
- 3D Format Support:
- Yes (HDMI Primary Formats)
- Frame Packing 1080p up to 24Hz
- Frame Packing 720p up to 50/60Hz
- Frame Packing 1080i up to 50/60Hz
- Top-Bottom 1080p up to 24Hz
- Top-Bottom 720p up to 50/60Hz
- Side-by-Side Half 1080p up to 50/60Hz
- Side-by-Side Half 720p up to 50/60Hz
- 3D supported when the DXLink HDMI Rx
- Scaler is in Bypass mode and format is 1080p60 or less
- Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM Dolby Digital and DTS support up to 48kHz, 5.1 channels
- Audio Resolution: 16 bit to 24 bit
- Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
- Local Audio Support: Yes for audio insertion
- HDCP Support:
- Yes, Supports AMX HDCP InstaGate Pro Technology When used with either an Enova DGX 8/16/32 Digital Media Switcher or DVX All-In-One Presentation Switcher the key support is up to 16 sinks per output, independent of source device
- When used as a single point to point solution the key support is defined by the source device
- DDC/EDID Support:
- The HDMI EDID in point to point mode is passed up from the sink device.
- When used with Enova DGX 8/16/32/64 Digital Media Switcher or Enova DVX-3155HD, DVX-3156HD or DVX-2155HD the HDMI EDID is passed from the Enova Switcher input to the TX and is user reprogrammable. The analog video input connection provides a fixed EDID set
- Analog video:
- Compatible Formats:
- RGBHV, RGBs, RGsB
- YPbPr (HDTV)
- Y/c (S-Video), C (Composite)
- Progressive Resolution Support: 480p up to 1920x1200 @ 60 Hz (reference the DXLink Twisted Pair Transmitters/Receiver Instruction Manual for extended list)
- Interlaced Resolution Support:
- 480i, 576i, 1080i (reference DXLink Twisted Pair Transmitters/Receiver Instruction Manual for extended list)
- If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler Bypass mode interlaced input will pass through unaltered
- Auto-Adjust Input: Supported
- RGB Input Signal Level Range: 1 Vpp nominal
- RGB Input Impedance: 75 ohms
- HV Sync Input Signal Level Range: 2 to 5 Vpp
- HV Sync Input Impedance: 2.5 pF Typ, 10 pF Max
- Digital Processing: 24 bit, 165 MHz
- Y/Pb/Pr Input Signal Level Range: 1.0 Vpp for Y, 700 mVpp for Pb Pr
- Y/Pb/Pr Input Impedance: 75 ohms
- Y/c (S-Video) Input Signal Level Range: 1.0 Vpp for Y, 1.0 Vpp for c
- Y/c (S-Video) Input Impedance: 75 ohms
- C (Composite) Input Signal Level Range: 1.0 Vpp
- C (Composite) Input Impedance: 75 ohms
- Input Connector: HD-15 (Breakout cable required for non RGBHV formats)
- Compatible Formats:
- AUDIO (ANALOG & DIGITAL S/PDIF):
- Input Signal Types:
- Stereo Analog, S/PDIF
- Video signal must be present to pass Audio
- Analog Input Level (Max): +2 dBu, unbalanced
- Analog Input Impedance: 10k ohms
- Analog to Digital Conversion: 48 kHz Sample Rate, 24-bit
- S/PDIF Audio Format Support:
- Dolby Digital, DTS, 2 CH L-PCM
- Dolby Digital and DTS support up to 48kHz, 5.1 channels
- S/PDIF Resolution: 16 to 24 bit
- S/PDIF Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
- S/PDIF Input Signal Level Range: 200 mVpp to 600mVpp terminated
- S/PDIF Input Impedance: 75 ohms
- Analog to Digital Reference Level: +2.5 dBu = 0 dBfs
- Input Connectors:
- 3.5mm Mini-Stereo Jack (Analog Stereo)
- RCA Jack (S/PDIF)
- Input Signal Types:
DVX-2255HD
- 6 x 3 All-in-one Multi-format HDMI Presentation Switcher with NX Control and DXLink Inputs
DVX-3255HD
- 10 x 4 All-in-one Presentation Switchers with NX Control
DX-RX
- DXLink HDMI Receiver Module
DX-TX-WP-BL
- DXLink Multi-format Wallplate Transmitter
Cabling for Success with DXLink
996 kb
- Other
Wallplate Transmitter
761 kb
- Other
Wallplate Transmitter
4556 kb
- Other
Wallplate Transmitter
344 kb
- Data Sheet
Wallplate Transmitter
38 kb
- Other
Wallplate Transmitter
475 kb
- Other
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact S&L Integrated
close
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/
Contact in regards to this product:
AMX
Model: DX-TX-WP-WH
B2B INQUIRIES ONLY
Request more information from a dealer near you
close
Request more information from a dealer near you