The S&L Catalog
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
277V Clear Connect Accessory Switch
Model: CCD-RS-277
Part #: FG2606-33-WH
- Clear Connect Enabled – Lutron's patented RF Technology uses a quiet band, essentially free of interference ensuring reliable communication between system devices
- Vacancy Sensing – Automatically turn off the lights and when integrated with RMS turn off electronic appliances off when a person leaves the space
- Occupancy Sensing – Turn lights on when a person enters a room and when integrated with RMS automatically turns on electronic appliances in the room
- Simple Web Configuration – Browse to the NetLinx® Clear Connect Gateway URL to quickly setup the Clear Connect Switch
Product Info
Tech Specs
OVERVIEW
The Lutron Clear Connect CCD-RS-277-WH is a 277V Accessory Switch that is used with CCD-8S-WH Clear Connect 120/277V Switches. The Switch when added to a Clear Connect System provides light control to virtually any location, without pulling wires.
The Lutron Clear Connect CCD-RS-277-WH is a 277V Accessory Switch that is used with CCD-8S-WH Clear Connect 120/277V Switches. The Switch when added to a Clear Connect System provides light control to virtually any location, without pulling wires.
- Clear Connect Enabled – Lutron's patented RF Technology uses a quiet band, essentially free of interference ensuring reliable communication between system devices
- Vacancy Sensing – Automatically turn off the lights and when integrated with RMS turn off electronic appliances off when a person leaves the space
- Occupancy Sensing – Turn lights on when a person enters a room and when integrated with RMS automatically turns on electronic appliances in the room
- Simple Web Configuration – Browse to the NetLinx® Clear Connect Gateway URL to quickly setup the Clear Connect Switch
- Warranty - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: UL, FCC
- AC Voltage: 277 Volts
- Warranty (Length/Type): 3 Years Limited
- Wattage (max capacity): 0.20 Watt
- Power:
- Power: Power: 277 V 50 / 60 Hz
- Typical Power Consumption
- Dimmer / Switch: 0.2 W
- Test conditions: load is off and nightlight mode is enabled
- Remote Dimmer / Switch: 0 W
- Test conditions: load is off
- Surge Protection: To withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits
- Power Failure: Power failure memory: should power be interrupted, the Clear Connect Gateway will return to its previous state when power is restored
- Environmental:
- Operating Humidity: 0 to 90%, Non-condensing
- Indoor use only
- ESD Protection:
- To withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2
- COMMUNICATIONS:
- Dimmers and switches communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater
- Remote dimmers / switches are not required to be within a specific range of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz
- Installation:
- Mounting Requires a U.S. wallbox. 3 . in (89 mm) deep recommended, 2 . in (57 mm) deep minimum
- Wiring Uses conventional 3-way and 4-way wiring
- Connectors:
- 1 Ethernet port, 1 coaxial power socket
- Certifications:
- CSA , NOM, IC, COFETEL
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact S&L Integrated
close
S&L Integrated
7 Midway Road
Thomasville, GA 31757
USA
(229) 378-8866
https://slintegrated.com/
Contact in regards to this product:
AMX
Model: CCD-RS-277
B2B INQUIRIES ONLY
Request more information from a dealer near you
close
Request more information from a dealer near you